Realme C11 spare parts

Realme C11 Repuestos - Technical Characteristics

The Realme C11 is a smartphone model released by Realme Tech, offering various high-quality components and features. Here, we detail the primary replacement parts—collectively referred to as 'repuestos'—for this device.

• Screen/Digitizer: The Realme C11 has a 6.5 inch IPS LCD screen with a resolution of 720 x 1560 pixels.
• Battery: A non-removable Li-Po 5000 mAh battery powers the device.
• Camera: It comes with a dual rear camera setup of 13MP and 2MP with an LED flash, and a 5MP front camera.
• Charging Port: It uses a MicroUSB 2.0 port for charging and connecting to other devices.

Instructions for Replacing Realme C11 Repuestos

Warning

Performing repairs on your own device can void the warranty and may potentially cause more damage. Disassemble and reassemble your device with caution.

Replacing the Screen/Digitizer

1. Power off the device.
2. Remove the SIM card tray and any external covers or cases.
3. Use a heat gun to soften the adhesive holding the screen together.
4. With a smartphone opening tool, gently pry open the screen.
5. Disconnect the screen connector and remove the damaged screen.
6. Attach the new screen, applying firm (but not forceful) pressure to ensure it adheres properly.
7. Power on the device to confirm the screen is working correctly.

Replacing the Battery

1. Follow the steps for screen removal.
2. Once the screen is removed, you will have access to the battery.
3. Using a plastic pick, gently lift the battery, being cautious not to damage the ribbon cables.
4. Disconnect the battery connector and replace the old battery with a new one.
5. Follow the steps to replace the screen and restart the device.

Replacing the Camera

1. Follow the steps detailed above to open the device and reach the motherboard.
2. Identify the camera components - front camera and rear camera.
3. Remove the connectors from the cameras you want to replace, taking care not to damage the lenses or sensor.
4. Replace with new camera components and gently press on the connectors to ensure they are attached correctly.
5. Close the device with the same care and sequence used to open it.

Replacing the Charging Port

1. Follow the steps for opening the device and accessing the motherboard.
2. Detach the connector attaching the battery to the motherboard and remove the battery.
3. Locate the charging port and gently disconnect it from the motherboard.
4. Insert the new charging port making sure it is properly connected to the motherboard.
5. Re-insert the battery and close the device carefully.