Realme C25 spare parts

    There are 16 products.

    Technical Characteristics of Realme C25 Repuestos

    The Realme C25 smartphone is a powerful device with some impressive specifications. When ordering repuestos (spare parts) for this phone, it is important to know these technical characteristics.

    • Screen: An IPS LCD, 720x1600 pixels, 6.5 inches (~270 ppi density) display
    • Battery: A massive non-re...

    Technical Characteristics of Realme C25 Repuestos

    The Realme C25 smartphone is a powerful device with some impressive specifications. When ordering repuestos (spare parts) for this phone, it is important to know these technical characteristics.

    • Screen: An IPS LCD, 720x1600 pixels, 6.5 inches (~270 ppi density) display
    • Battery: A massive non-removable Li-Po 6000 mAh battery that supports 18W fast charging
    • Camera: The phone boasts a main camera (48 MP, f/1.8, 26mm (wide), PDAF | 2 MP, f/2.4 (macro) | 2 MP, f/2.4 (depth)) and a 8 MP, f/2.0, 26mm (wide) selfie camera.
    • Motherboard: The heart of this device is its chipset Mediatek Helio G70 (12 nm)
    • Memory: Realme C25 has a memory configuration of 64GB 4GB RAM, 128GB 4GB RAM; dedicated slot for microSDXC.

    Replacing Realme C25 Repuestos

    Here is a step by step guide on how to replace parts of Realme C25 phone.

    Tools Needed:

    • Small Phillips Screwdriver
    • Spudger
    • Plastic Opening Tools

    Step 1: Battery Replacement

    Before beginning, power off the phone. Next, with the opening tool, gently take off the back cover from the top tray. Using the spudger, disconnect the battery connector to the motherboard. Very gently, remove the old battery. Place the new battery and connect it to the motherboard. Replace the back cover.

    Step 2: Screen Replacement

    First, remove the battery following the previous steps. Unscrew the screws holding the screen connectors. Carefully detach the screen, replace with the new one and reconnect the wires. Place back the battery and screws, ensue all parts are securely in place, then reattach the back cover.

    Step 3: Camera Replacement

    The camera is located at the back of the phone. After removing the back cover and battery, locate the camera connector on the motherboard. Use the spudger to disconnect it. Fit in the new camera, reconnect it to the motherboard, replace the battery and back cover.

    Please note, these instructions are a guide only and should be done by a qualified technician.

    Less
    More
    Showing 1 - 16 of 16 items