Realme C67 4G spare parts

Technical Details of Realme C67 4G repuestos

The Realme C67 4G repuestos embodies several distinct features that set them apart. The following specs offer the fundamental characteristic specifics:

• Brand: Realme
• Model: C67 4G
• Display: 6.75 inches, 1080 x 2400 pixels
• OS: Android 11, Realme UI 2.0
• Memory: 64GB 4GB RAM, 128GB 6GB RAM
• Battery: Non-removable Li-Po 5000mAh, Fast charging 18W

Instructions for Replacing Realme C67 4G repuestos

Below are the technical instructions for replacing Realme C67 4G repuestos:

Tools Required:

• Small Phillips Screwdriver
• Spudger or Thin Plastic Pry Tool

Procedure:

Note: Proceed with caution, electronic repairs carry the risk of electrostatic discharge.

1. Power off the device

   Always power off your phone before starting any repair to avoid accidental short circuits.

2. Remove the SIM card tray

   Use the SIM card removal tool to eject and remove the SIM card tray from your phone.

3. Open the phone

   Use a heat gun to apply a moderate amount of heat around the edges of the phone to soften the adhesive. Use a plastic prying tool or spudger to gently pry open the back cover. Be careful not to damage any internal components.

4. Disconnect Battery

   Locate the battery connector on the motherboard. Using a spudger, gently disconnect the battery connector.

5. Change the required part

   Locate and unscrew the defective component's screws using a small Phillips screwdriver. Replace it with the new part.

6. Reassembly

   Trace back your steps and reassemble your phone. Remember to reapply adhesive where necessary and ensure that all connections are secure.