Realme Narzo 50A Prime spare parts

Technical Specifications of Realme Narzo 50A Prime Repuestos

The Realme Narzo 50A Prime Repuestos are high-quality, durable parts that make this smartphone a reliable and efficient device. Here are the technical details:

• Screen: 6.5-inch IPS LCD, 720 x 1600 pixels, ~270 ppi density
• Processor: MediaTek Helio G85(12nm), Octa-core
• Storage: 64GB/128GB, expandable up to 256GB via microSD card
• RAM: 4GB/6GB
• Camera: Triple-camera setup with 50MP main camera
• Battery: 6000mAh Li-Po, non-removable
• Os: Realme UI 2.0, based on Android 11

Instructions for Replacing Realme Narzo 50A Prime Repuestos

Here are step-by-step instructions on how to replace Realme Narzo 50A Prime Repuestos:

I. Removing the Old Parts

• Step 1: Switch off the phone and remove the SIM tray.

• Step 2: Heat the back cover using a heat gun or hair dryer to weaken the adhesive. Use a suction cup and plastic opening tool to gently pry off the back cover.

• Step 3: Remove the screws connecting the plastic shield and take off the shield.

• Step 4: Disconnect the battery connector and any other relevant connectors. Be careful to avoid damaging any ribbons or wires.

II. Installing the New Parts

• Step 1: After removing the necessary components, replace them with new parts.

• Step 2: Reconnect all the connectors and ensure they're secure.

• Step 3: Replace the plastic shield and screw it back in place.

• Step 4: Glue the back cover onto the phone body. You may use B7000 or any other phone-specific adhesive. Note to use the adhesive moderately.

• Step 5: Finally, switch on the phone to ensure everything is working properly.

These steps have been provided as a guide for professional phone repair technicians. Be aware that Btechholic is not responsible for any damage that might occur during the repair process.