Realme X2 repuestos

Technical Characteristics of Realme X2 Repuestos

The Realme X2 Repuestos include a variety of components essential for the functionality and performance of the Realme X2 smartphone. The following are the technical specifications for some of these key repuestos (parts):

• Screen Digitizer: LCD, 1080 x 2340 pixels, 6.4 inches, Corning Gorilla Glass 5
• Battery: Non-removable Li-Po 4000 mAh battery, Fast charging 30W
• Rear Camera: Quad Camera setup: 64 MP, 8 MP, 2 MP, 2 MP
• Front Camera: Single Camera setup: 32 MP with HDR
• Motherboard: Qualcom SDM730 Snapdragon 730G (8 nm), Octa-core CPU

Instructions for Replacing Realme X2 Repuestos

Disclaimer

Before proceeding, ensure that you are technically capable of operating delicate electronic devices. Any mistakes could potentially cause irreversible damage to your device.

Required Tools

Before starting, ensure you have the necessary tools including a sim card removal tool, a pry tool, a Phillips head screwdriver, tweezers, and a suction cup.

Opening the Device

Start by turning off the device and removing the SIM card tray. Use the suction cup and pry tool to gently detach the rear case from the front half. Be careful not to harm the fingerprint sensor cable.

Replacing the Battery

Remove any remaining screws securing the battery. Unplug the connector and gently pull the adhesive tabs underneath to remove the battery.

Replacing the Motherboard

Disconnect all connectors from the motherboard. Remove all screws securing the board and lift it out carefully.

Replacing the Screen Digitizer

Warm up the adhesive holding the screen in place and use a plastic card to gently split the adhesive. Remove the broken screen and replace it with the new one. Gently press down to secure the adhesive.

Once you have replaced the necessary components, just reverse these instructions to reassemble your device.