Realme X3 Superzoom RMX2086 spare parts

Realme X3 SuperZoom RMX2086 Technical Specifications

The Realme X3 SuperZoom RMX2086 is a high-performance smartphone with superior camera capabilities. Below are some of its technical characteristics:

• Display: 6.6 inches, 108.6 cm2, 1080 x 2400 pixels, Corning Gorilla Glass 5
• Processor: Qualcomm Snapdragon 855+, Octa-core CPU
• Storage: UFS 3.0, 128GB / 256GB
• Memory: LPDDR4x, 8GB / 12GB
• Battery: 4200mAh, 30W Dart Charge, USB Type-C
• Operating System: Realme UI based on Android 10
• Camera: 64.0 MP Primary, 8.0 MP Periscope, 8.0 MP Ultra-wide, 2.0 MP Macro

Instructions for Realme X3 SuperZoom RMX2086 Repuestos Replacement

Replacing components (repuestos) on your Realme X3 SuperZoom RMX2086 device should be done with utmost care. Ensure to follow these steps:

Tools Needed

• Professional screwdriver set
• Plastic prying tools
• Tweezers
• Heat gun or hair dryer

Replacement Steps

Please follow the below instructions to replace components (repuestos) for your Realme X3 SuperZoom RMX2086:

1. Power off the device: Before starting the replacement process, make sure the device is powered off.
2. Remove the SIM card tray: Start by removing the SIM card tray using the sim ejector tool.
3. Heat and remove the back cover: Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover, then carefully leverage it off with a prying tool.
4. Remove screws and the plastic panel: Once the back cover has been removed, you will have access to 14 screws, unfasten them and carefully lift the plastic panel.
5. Disconnect and remove the battery: Disconnect the battery connector and adhesive to safely remove the battery. Be careful not to bend or puncture the battery.
6. Replace the component: At this stage, locate the repuesto you wish to replace. You may need to unscrew more screws depending on the component. Once unscrewed, disconnect it and replace it with the new part.
7. Reassemble the phone: Proceed to reconnect all the connectors, including the battery. Place all the panels back and fasten the screws. Finally, place the back cover back, ensuring you press firmly around the edges to adhere it firmly.
8. Power on the device: Once you have put back everything, switch on the device to check if the replaced part is functioning properly.

Please note: This instruction guide is to help you replace simple parts yourself. For more complex parts or if you are unsure, we recommend seeking help from a professional technician.