Display lcd Samsung

Pantalla lcd Samsung Technical Characteristics

The Pantalla lcd Samsung is a high-quality screen replacement used for Samsung smartphones. When your phone's screen is broken, scratched, or doesn't display images as they should be, replacing it with a new Pantalla lcd Samsung provides a like-new viewing experience.

Technical Specifications:

• Screen Size: Varies based on the Samsung device model. Usually between 5.5 to 6.7 inches.
• Resolution: Again, it depends on the model but generally offers a range from 720 x 1560 pixels to 1440 x 3040 pixels.
• Display Type: Capacitive touchscreen, 16M colors.
• Display Technology: LCD (for older models) and Super AMOLED (for newer models).
• Compatibility: Compatible with a wide range of Samsung smartphones.

Instructions for Replacing Pantalla lcd Samsung

Replacement of the Pantalla lcd Samsung screen should be done with utmost care. It is best performed by professionals or people with technical experience. If you wish to try it yourself, please follow these steps:

Tools Required:

• Small phillips screwdriver
• Small flathead screwdriver
• Pry tool or plastic opening tools
• Heat gun or hair dryer

Replacement Procedure:

Warning: Please remember to turn off your smartphone before starting the process. Also, note that if you decide on at-home repair, you're doing it at your own risk.

• Remove the back cover of your Samsung smartphone using the pry tool.
• Detach the battery connector and remove the battery.
• Take out the screws holding the phone's frame using the screwdriver.
• Remove the frame, revealing the internal mechanisms of the phone.
• Disconnect all cables connected to the lcd screen. Be gentle not to damage any parts.
• Utilise a heat gun or hair dryer to loosen the adhesive on the edges of the lcd screen. Be careful not to overheat the screen.
• Gently lift the lcd screen starting from the top. Be careful not to put any pressure in the middle of the screen.
• Once the damaged lcd is removed, place the new Pantalla lcd Samsung in the vacant area. Make sure all cables are connected properly.
• Reassemble the phone by reversing the steps.