Samsug Galaxy J3 2018 spare parts

Samsung Galaxy J3 2018 Technical Specifications

Model Name: Samsung Galaxy J3 2018
Display: 5.0 inches, 720 x 1280 pixels, Super AMOLED
Processor: Exynos 7570 Quad (14 nm)
RAM: 2GB
Storage: 16GB, expandable via Micro SD card up to 256GB
Battery: Removable Li-Ion 2600 mAh battery
Camera: 8MP Rear, 5MP Front
Operating System: Android 8.0 (Oreo)

Instructions to Replace Samsung Galaxy J3 2018 Repuestos

Tools Needed

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers
• Spudger

Steps to Replace the Screen

• Step 1: First, power off your Samsung Galaxy J3 2018.
• Step 2: Use a plastic opening tool to carefully pry the back cover off starting on the side of the device.
• Step 3: Once you have an opening, slide the plastic opening tool around the phone to fully detached the back cover.
• Step 4: Remove the screws securing the internal cover with the small Phillips screwdriver.
• Step 5: Slowly detach the internal cover using the plastic opening tool.
• Step 6: Disconnect the battery cable from the motherboard using the spudger.
• Step 7: Remove the screws securing the LCD screen and disconnect the screen's cable from the motherboard.
• Step 8: Replace the broken screen with the new one.
• Step 9: Reassemble the smartphone by reversing the steps.

Disclaimer: Please, proceed with caution and at your own risk. This guide is intended for education purposes only.