Samsung A20Ss A207 Spare Parts

    There are 45 products.

    Repuestos Samsung A20Ss A207 Technical Specifications

    The Repuestos Samsung A20Ss A207 is composed of a variety of higher-end components that make it an efficient device. The specifications are:

    • Display- 6.5 inches IPS LCD, HD resolution (720 x 1560 pixels).
    • Processor- Qualcomm SDM450 Snapdragon 450.
    • RAM- 3GB / 4GB.
    • Storage- 32GB / 64G...

    Repuestos Samsung A20Ss A207 Technical Specifications

    The Repuestos Samsung A20Ss A207 is composed of a variety of higher-end components that make it an efficient device. The specifications are:

    • Display- 6.5 inches IPS LCD, HD resolution (720 x 1560 pixels).
    • Processor- Qualcomm SDM450 Snapdragon 450.
    • RAM- 3GB / 4GB.
    • Storage- 32GB / 64GB expandable via microSD up to 512GB.
    • Battery- 4000 mAh Li-Po.
    • Rear camera- 13MP (wide), 8MP (ultrawide), 5MP (depth).
    • Front camera- 8MP.

    Instructions to Replace Repuestos Samsung A20Ss A207 Components

    Please follow the steps below carefully. Ensure you have all necessary tools for the repair: a screwdriver, tweezers, plastic opening tools, and a SIM card eject tool.

    Step 1: Turn Off the Device

    Press and hold the power button on the side of the smartphone. Tap 'Power off' and then 'Power off' again to confirm.

    Step 2: Remove the SIM Tray

    Use a SIM card eject tool to remove the SIM card tray from the device.

    Step 3: Open the Device

    Use a plastic opening tool to gently pry up the back cover of the device starting at the bottom and working your way around.

    Step 4: Remove the Screws

    After opening the back cover, you will see some screws. Use a screwdriver to carefully remove all of them.

    Step 5: Remove the Battery

    Gently unclip the battery connector from the motherboard. Pry up the battery and remove it.

    Step 6: Replace the Component

    Once the battery has been removed, you can now reach other components such as the display, motherboard, cameras, etc. Replace the faulty component with the new one.

    Step 7: Reassemble the Device

    Once you've replaced the faulty component(s), follow the disassembly steps in the reverse order to reassemble your device.

    Note: This guide is intended as a general direction. Please seek professional help if you are unsure about anything.

    Less
    More
    Showing 31 - 45 of 45 items