Samsung c3510 spare parts

    There are 5 products.

    Samsung C3510 Spare Parts Technical Specifications

    The Samsung C3510, also known as the Genoa, is a touchscreen phone which requires specialized parts for its maintenance and repair. The most commonly replaced parts include the Screen, Battery, and the Rear Case among others.

    Technical Specifications

    • Screen: The Samsung C3510 boasts a TFT ...

    Samsung C3510 Spare Parts Technical Specifications

    The Samsung C3510, also known as the Genoa, is a touchscreen phone which requires specialized parts for its maintenance and repair. The most commonly replaced parts include the Screen, Battery, and the Rear Case among others.

    Technical Specifications

    • Screen: The Samsung C3510 boasts a TFT touchscreen, which may require a replacement due to cracks or scratches.
    • Battery: Lithium-ion 960mAh battery with a talk time of up to 10 hours.
    • Rear Case: The rear case is traditionally plastic, and variances in colours can be provided depending upon personal preference.

    Instructions for Replacing Samsung C3510 Spare Parts

    Below are the step-by-step instructions for replacing the above-mentioned parts on Samsung C3510:

    Screen Replacement:

    • Start by turning off your device to prevent any electrical damage.
    • Use a plastic pry tool to remove the back cover and the battery.
    • Using appropriate screwdriver, remove the screws holding the front bezel.
    • Gently loosen the front bezel from the screen.
    • Disconnect the existing screen from the motherboard and replace it with the new screen.
    • Reassemble the phone in the reverse order.

    Battery Replacement:

    • Turn off the device.
    • Using a plastic pry tool, remove the back cover.
    • Gently lift the old battery out of its dock.
    • Insert the new battery into the slot, ensuring the contacts match.
    • Reattach the back cover.

    Rear Case Replacement:

    • Ensure the device is powered off.
    • Use a pry tool to remove the back cover.
    • Detach the old rear case.
    • Fit the new rear case into place, ensuring it fits into the correct slots and aligns with screw holes.
    • Reaffix the back cover.

    Please ensure you handle all hardware with care to prevent any further damage.

    Less
    More
    Showing 1 - 5 of 5 items