Samsung Galaxy A02S spare parts

Samsung Galaxy A02S Technical Specifications

The Samsung Galaxy A02S is a smartphone from Samsung's Galaxy A series, with some notable features and characteristics, including :

• Display: 6.5 inches, PLS IPS, 720 x 1600 pixels, 20:9 ratio (~270 ppi density)
• Operating System: Android 10
• Processor: Octa-core (4x1.8 GHz Cortex-A53 & 4x1.8 GHz Cortex-A53)
• Memory: 32GB 3GB RAM, 64GB 4GB RAM
• Camera: Triple Camera system - 13 MP, f/2.2, (wide), AF / 2 MP, f/2.4, (macro) / 2 MP, f/2.4, (depth)
• Battery: Li-Po 5000 mAh, non-removeable

Steps to replace Samsung Galaxy A02S repuestos

Replacing the components of Samsung Galaxy A02S requires careful attention and precision. Follow the steps below to ensure a successful replacement:

Tools Needed

• PH000 Philips screwdriver
• Plastic opening tools
• Spudger
• Tweezers

Disassembly

Step 1: Turn off your Samsung Galaxy A02S and remove the sim card tray.

Step 2: Loosen the glued back cover using a heated machine if possible and pry it up with a plastic spudger. Go around all the edges carefully.

Step 3: Remove all visible screws affixing the plastic shield with a PH000 Philips screwdriver.

Step 4: Lift up the plastic shielding after removing the screws.

Component Replacement

Note: The replacement process may vary depending on the specific component being replaced. This is a general guideline.

Step 5: Locate the component that needs replacing. Carefully disconnect any cables attaching it to the phone and remove any screws holding it in place.

Step 6: Replace the faulty component with a new one. Reconnect any cables and replace any screws.

Reassemble

Step 7: Replace the plastic shielding and screw it back into place.

Step 8: Press the back cover back into place. Ensure it is securely attached around all edges.

Step 9: Turn on the phone to ensure the replacement has been successful.

Remember to follow each of these steps carefully and in order to replace the Samsung Galaxy A02S components successfully.