Samsung Galaxy A14 4G SM-A145 spare parts

Technical Characteristics of Samsung Galaxy A14 4G SM-A145 Repuestos

The Samsung Galaxy A14 4G SM-A145 is an excellent smartphone featuring top-notch components which are also referred to as repuestos in some regions. Here are the technical characteristics of these components:

• Screen: 6.5 inches, 720x1600 pixels, PLS TFT LCD display.
• Processor: Octa-core, 2.3 GHz, MediaTek Helio P35
• RAM: 3GB or 4GB
• Storage: 32GB or 64GB, expandable via microSDXC
• Battery: Li-Po 5000 mAh, non-removable
• Camera: Quad camera setup - 48 MP (wide) + 5 MP (ultrawide) + 2 MP (macro) + 2 MP (depth)
• Operating System: Android 10, upgradable to Android 11, One UI 3.1

Instructions for Replacing Samsung Galaxy A14 4G SM-A145 Repuestos

Before you begin, ensure you have the necessary tools including a plastic opening tool, a Phillips #00 screwdriver, and a spudger.

Disclaimer: Please note that this process needs a careful and professional handling. If unsure, please refer to an authorized service center. Attempting repairs yourself may void the warranty and can result in permanent damage to the device.

• Opening the Device

  Turn off the device and remove the SIM card tray. Use the plastic opening tool to unclip the case's edges starting from the bottom. Be careful to avoid damaging the internal components.

• Disconnecting the Battery

  Remove the screws securing the protective metal plate. Lift the plate then disconnect the battery connector using a spudger.

• Removing the Screen

  Disconnect the screen connector, then use a spudger to gently lift the screen, starting from the top. Be careful not to put too much force to avoid breaking the screen.

• Replacing the Component

  Identify the broken component to be replaced. Most components are connected via a connector. Use a spudger to gently lift the connector and remove the defective component.

• Reassembling the Device

  Once the new component is in place, re-connect the connectors and reassemble the device in reverse order - starting with the screen, then the battery and finally, snapping the case together and inserting the SIM card tray.