Samsung Galaxy A25 5G SM-A256 spare parts

Samsung Galaxy A25 5G SM-A256 Technical Characteristics

The Samsung Galaxy A25 5G SM-A256 is a high-level smartphone notable for its technical features. Several standout attributes are:

• Model: Samsung Galaxy A25 5G SM-A256
• Network: 5G
• Display: 6.5 inches, Super AMOLED, 720 x 1560 pixels resolution
• Processor: Octa-core
• RAM: 4GB/6GB
• Storage: 64GB/128GB, expandable up to 1TB via microSD
• Camera: Quad camera, 48MP main sensor, 8MP ultra wide, 5MP depth, and 5MP macro
• Battery: 5000mAh, supports 18W fast charging

How to Replace Samsung Galaxy A25 5G SM-A256 Repuestos (Spare Parts)

Please follow the detailed instructions below to replace the spare parts of the Samsung Galaxy A25 5G SM-A256 mobile phone:

Tools Required

• Phillips #00 Screwdriver
• Prying tool
• Sim card ejector

Procedure

1: Power Off the Phone

Before starting, switch off your Samsung Galaxy A25 5G SM-A256 to prevent any electrical damage.

2: Remove the SIM Card Tray

Insert the SIM Card Ejector into the tiny hole to extract the SIM card tray out of the phone.

3: Open the Back Cover

Use the prying tool to gently lift the back cover starting from the bottom and going around the edges.

4: Remove the Screws

With the Phillips #00 Screwdriver, remove all visible screws that are holding the inner components in place.

5: Replace the Spare Part

Now, carefully lift the defective component and replace it with a new one. This process may be different depending on which part you are replacing (i.e., motherboard, camera, battery, etc.). Always be gentle and watch out for delicate parts or ribbon cables that may tear.

6: Reassembly

After successfully replacing the defective parts, screw all the parts back into their respective places, snap the back cover back on, and finally, insert the SIM card tray.

Note: Always remember to keep the workspace clean and make sure not to force anything in order to avoid any damage to the device. If a part does not fit or come off easily, double-check to make sure all screws have been removed and that you're not applying pressure in the wrong places.