Samsung Galaxy A30 A305 spare parts
There are 48 products.Samsung Galaxy A30 A305 Technical Specifications
The Samsung Galaxy A30 A305 is a high-performing smartphone with an array of impressive features. Here is a breakdown of its key technical characteristics:
- Display: 6.4 inches Super AMOLED capacitive touchscreen, 16M colors
- Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~403 ppi density)...
Samsung Galaxy A30 A305 Technical Specifications
The Samsung Galaxy A30 A305 is a high-performing smartphone with an array of impressive features. Here is a breakdown of its key technical characteristics:
- Display: 6.4 inches Super AMOLED capacitive touchscreen, 16M colors
- Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~403 ppi density)
- Operating System: Android 9.0 (Pie), upgradable to Android 11, One UI 3.1
- Processor: Exynos 7904 (14 nm) Octa-core (2x1.8 GHz Cortex-A73 & 6x1.6 GHz Cortex-A53)
- Memory: 32GB 3GB RAM, 64GB 4GB RAM
- Camera: Dual camera; 16 MP, f/1.7 main + 5MP, f/2.2 ultrawide
- Battery: Li-Po 4000 mAh, non-removable
Instructions for Replacing Repuestos of Samsung Galaxy A30 A305
Tools Required
- Screwdriver set
- Heat gun or blow dryer (optional)
- Plastic pry tool
- Tweezers
Steps to Replace Repuestos
Follow the steps below to replace the repuestos on a Samsung Galaxy A30 A305 smartphone:
- Switch off the smartphone and lay it screen-down on a soft surface.
- Using your heat gun or blow dryer, heat the edges of the device to melt the adhesive securing the back cover.
- With your plastic pry tool, slowly pry open the back cover, ensuring not to damage any inner components.
- Remove the screws securing the inner cover with your screwdriver set, then carefully remove the inner cover using the pry tool.
- Identify the repuesto that needs to be replaced. This could be the battery, the speaker, camera module, etc.
- Once identified, if its connected via ribbon cable, use the tweezers to disconnect the faulty repuesto, ensuring not to damage the connector.
- Replace the faulty repuesto with the new one, connecting it in the same manner as the old unit.
- After the repuesto is secured, replace the inner cover and secure it with the screws.
- Place the back cover and apply pressure until it adheres to the adhesive.
- Switch on the phone to ensure the repuesto is functioning correctly.
Less More Showing 1 - 30 of 48 items
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible