Samsung Galaxy A32 4G SM-A325 spare parts

Samsung Galaxy A32 4G SM-A325 Technical Characteristics

The Samsung Galaxy A32 4G SM-A325 repuestos holds key specifications for superior performance. With a prudent choice of components, this device promises an impressive user experience.

• Display: 6.4-inch Super AMOLED, 1080 x 2400 pixels, 20:9 ratio (~411 ppi density)
• Processor: Mediatek Helio G80 (12 nm)
• Storage: 64GB/128GB Internal, up to 1TB with microSD
• RAM: 4GB/6GB/8GB
• Battery: Non-removable Li-Po 5000 mAh
• Operating System: Android 11, One UI 3.1

How to Replace Samsung Galaxy A32 4G SM-A325 Repuestos

Please follow the steps below to replace your Samsung Galaxy A32 4G SM-A325 repuestos:

Tools Needed

• Phillips #00 Screwdriver
• Plastic Opening Tools
• Spudger
• Tweezers
• Heat gun or Hair Dryer

Instructions

Step 1: Back Cover Removal

• Switch off the phone.
• Heat the edges of the back cover for about 2 minutes.
• Use a plastic opening tool to gently pry open the body. Take care to prevent damage.

Step 2: Disconnecting the Battery

• Unscrew the 15 Phillips #00 screws from the mid-frame.
• Use the plastic opening tool to remove the mid-frame.
• Use a spudger to disconnect the battery connector from the motherboard.

Step 3: Replacing the Required Part

• Locate the part that needs replacement.
• Loosen any screws or connectors holding it down using a Phillips #00 screwdriver or a spudger.
• Using tweezers, gently remove the part.
• Place the new part in the original location, and secure any screws or connectors.

Step 4: Reassembly

• Connect the battery back to the motherboard.
• Replace the mid-frame and tighten the 15 Phillips #00 screws.
• Firmly press the back cover back into place.

Note: This is a generic repair process and might vary slightly based on the specific part being replaced.