Technical Specifications of Repuestos Samsung Galaxy A51 A515
The Galaxy A51 A515 is a notable entry in Samsung's A-Series lineup, offering impressive specifications that accommodate the needs of an everyday smartphone user. Here's a breakdown of the Galaxy A51 A515 technical specifications:
- Display: 6.5-inch Super AMOLED, Full HD+
- Processo...
Technical Specifications of Repuestos Samsung Galaxy A51 A515
The Galaxy A51 A515 is a notable entry in Samsung's A-Series lineup, offering impressive specifications that accommodate the needs of an everyday smartphone user. Here's a breakdown of the Galaxy A51 A515 technical specifications:
- Display: 6.5-inch Super AMOLED, Full HD+
- Processor: Exynos 9611
- RAM: 4GB | 6GB | 8GB
- Storage: 64GB | 128GB, expandable up to 512GB via MicroSD card
- Battery: 4000mAh with 15W fast charging
- Camera: Quad Rear Camera (48MP + 12MP + 5MP + 5MP) and 32MP Selfie Camera
- Operating System: Android 10 with One UI 2.0
- Connectivity: 4G, Bluetooth 5.0, Wi-Fi, USB Type-C
Instructions for Replacing Repuestos Samsung Galaxy A51 A515
Replacement of components on the Samsung Galaxy A51 A515 should be performed with great care. Following are the general steps on how to perform a replacement.
Materials Needed
- Replacement parts for the Samsung Galaxy A51 A515
- Screwdriver
- Plastic pry tools
- Tweezers
Steps for Replacement
Before you start, ensure you power off your Samsung Galaxy A51 A515 and remove the SIM card tray.
- Remove the back cover: Heat the edges of the back cover to softening the adhesive. Insert a plastic pry tool between the frame and the rear cover to pry it up.
- Remove the battery: Unscrew the 15 Phillips screws securing the middle frame. Remove the middle frame with a plastic pry tool. Disconnect the battery flex cable and pry up the battery.
- Replace the component: Depending on the replacement part, disconnect the flex cable of the component. Remove the component and replace it with the new one.
- Reassemble the phone: Reconnect the flex cables, reinsert the battery, refit the middle frame and secure it with screws, and finally, attach the back cover by pressing down its edges.
- Power on the device to check functionality: After reassembly, power on the device to verify that the replacement part is functioning as expected.
Note: The above-mentioned steps are general guidelines and may vary depending on the part being replaced.
Less