Samsung Galaxy A70 A705 spare parts

    There are 51 products.

    Samsung Galaxy A70 A705 Repuestos Technical Characteristics

    The Samsung Galaxy A70 A705 comes with an assortment of repuestos, or replacement parts, that maintain the phone's top-level performance even after a repair. Here are the technical characteristics of some of these key components:

    • Display: 6.7-inch Super AMOLED screen with a resoluti...

    Samsung Galaxy A70 A705 Repuestos Technical Characteristics

    The Samsung Galaxy A70 A705 comes with an assortment of repuestos, or replacement parts, that maintain the phone's top-level performance even after a repair. Here are the technical characteristics of some of these key components:

    • Display: 6.7-inch Super AMOLED screen with a resolution of 1080 x 2400 pixels.
    • Battery: Non-removable Li-Po 4500mAh battery.
    • Camera: Triple camera system with 32 MP primary sensor, 8 MP ultrawide sensor, and 5 MP depth sensor.
    • Charging Port: USB Type-C port for data transfer and fast charging.

    Instructions for Replacing Samsung Galaxy A70 A705 Repuestos

    Replacing components on Samsung Galaxy A70 A705 requires precision and patience to ensure no further damage is caused. Here are the steps for a display and battery replacement:

    Display Replacement

    • Switch off the phone.
    • Use a heat gun or blow dryer to warm the edges of the screen. This helps loosen the adhesive securing the display.
    • Insert a prying tool between the display and frame, gently working it around to separate the screen.
    • Once you’ve loosened the display, gently lift it away from the frame.
    • Disconnect the display connector and remove the screen.
    • Take your new display, connect the display connector and set the new screen into place. Make sure it fits perfectly within the frame.
    • Once the display is secured, switch on the phone to test the display functionality.

    Battery Replacement

    • Make sure that the mobile phone is switched off before starting.
    • Remove the phone casing and unscrew the necessary screws to access the battery compartment.
    • Gently disconnect the battery from its port.
    • Remove the adhesive strips holding the battery in place.
    • Install the new battery and reconnect the components.
    • Reassemble the phone, and power it on to test the new battery.

    Note: It’s important to have the correct tools available before starting this process. A professional should carry out these steps to avoid voiding any warranties or causing further damage to the device.

    Less
    More
    Showing 31 - 51 of 51 items