Samsung galaxy a8 2018 spare parts

    There are 39 products.

    Samsung Galaxy A8 2018 Technical Specifications

    The Samsung Galaxy A8 2018 is an essential piece of technology which requires careful replacement of parts for maintenance. Listed below are a few key technical specifications:

    • Dimensions: 149.2 x 70.6 x 8.4 mm (5.87 x 2.78 x 0.33 in)
    • Weight: 172 g (6.07 oz)
    • Display: Super AMOLED, 1080 x 2220 pixe...

    Samsung Galaxy A8 2018 Technical Specifications

    The Samsung Galaxy A8 2018 is an essential piece of technology which requires careful replacement of parts for maintenance. Listed below are a few key technical specifications:

    • Dimensions: 149.2 x 70.6 x 8.4 mm (5.87 x 2.78 x 0.33 in)
    • Weight: 172 g (6.07 oz)
    • Display: Super AMOLED, 1080 x 2220 pixels, 18.5:9 ratio (~441 ppi density)
    • Operating System: Android 7.1.1 (Nougat), upgradable to Android 9.0 (Pie), One UI
    • Chipset: Exynos 7885 (14 nm)
    • Battery: Non-removable Li-Ion 3000 mAh battery

    Instructions for Samsung Galaxy A8 2018 Repuestos Replacement

    Follow the steps below for a successful repuestos replacement:

    Before you Start

    Remember to backup all valuable data before proceeding with the following steps as it may be lost during the repair process.

    Step 1: Power off your device

    Before starting the replacement process, ensure that the device is switched off.

    Step 2: Remove the SIM card Tray

    Insert a paperclip or ejection tool into the hole on the SIM card slot to pop out the tray. Carefully remove the tray and set it aside.

    Step 3: Open the phone case

    Ensure to use a prying tool or spudger to remove the back cover of the phone case. Do this gently to avoid damage.

    Step 4: Remove the battery

    Disconnect the battery from the phone using professional tools. Always remember to take safety precautions when handling batteries.

    Step 5: Install the new Repuestos

    After removing the old parts, insert the new repuestos according to the manufacturer's instructions. Ensure the settings are correct before tightening and securing it in place.

    Step 6: Reassemble your device

    After the new Repuestos has been installed, reassemble the device in reverse order. Replace the cover and make sure all components are secure. Power on your device to ensure that the replacement has been successful.

    Final Note

    If the device does not function as expected after following these instructions, please seek assistance from a professional technician.

    Less
    More
    Showing 31 - 39 of 39 items