Samsung Galaxy A9 2018 spare parts

Samsung Galaxy A9 2018 Repuestos Technical Characteristics

The Samsung Galaxy A9 2018 comes with various notable technical characteristics. Below is a detailed overview of some of the key repuestos (spare parts) you might need to repair or replace in this smartphone model.

• Touch Screen Digitizer: This is the outer glass part of the display, which is responsible for touch response. It also includes the display LCD which shows the visual output.
• Main Motherboard: This is the main circuit board of the smartphone housing the processor, memory, and other essential components.
• Camera Module: The Samsung Galaxy A9 2018 boasts four rear cameras including a 24MP main camera, an 8MP ultrawide lens, a 10MP telephoto lens, and a 5MP depth sensor. There's also a 24MP front camera.
• Battery: It comes with a non-removable Li-Ion 3800 mAh battery.
• Charging Port: This is a USB Type-C port used for charging and data transfer.

Instructions for Replacing Samsung Galaxy A9 2018 Repuestos

Tools Needed

• Screwdriver
• Spudger
• Tweezers
• Plastic opening tools
• Hot air gun / Heat pad

General Guidelines

Always remember to power off your Samsung Galaxy A9 2018 before beginning any replacement procedure to avoid any potential short circuits. Also, handle each part with care. Some parts may be fragile and can easily be damaged if mishandled.

Step-by-Step Replacement Procedure

• Step 1: Start by removing the SIM tray from the device.
• Step 2: Use a heat gun or hot pad to soften the adhesive on the back cover, then use a plastic opening tool to carefully separate the back cover from the phone.
• Step 3: Unscrew all the visible screws securing the mid-frame. Use the spudger to carefully remove the mid-frame.
• Step 4: Disconnect the battery connector first to disconnect power supply, then disconnect the other flex cables.
• Step 5: To replace a specific part, locate it on the motherboard, unscrew any screws holding it in place, and use the tweezers to remove it.
• Step 6: Replace the faulty component with a new one, then follow the disassembly process in reverse to reassemble your phone.