Samsung galaxy ace 3 s7270 spare parts

Samsung Galaxy Ace 3 S7270 Technical Specifications

The Samsung Galaxy Ace 3 S7270 is a reliable mid-range smartphone launched in 2013, with several key features:

• 4-inch TFT capacitive touchscreen,
• 480 x 800 pixels resolution,
• 5 MP primary camera,
• Video recording capability at 720p@30fps,
• 1 GB RAM, with 4 GB internal memory,
• MicroSD slot, expandable up to 64 GB,
• Runs on Android 4.2 (Jelly Bean).

Instructions for Replacing Samsung Galaxy Ace 3 S7270 Repuestos

Tools Needed

You will need the following tools to carry out this repair:

• Small Phillips screwdriver,
• Plastic opening tools,
• Tweezers.

Step-by-step Guide

Here are the detailed steps for replacing the Samsung Galaxy Ace 3 S7270 repuestos:

1. Switch off the device.

2. Remove the back cover and battery.

3. Unscrew all visible screws that connect the rear housing to the front frame with a small Phillips screwdriver.

4. Using a plastic opening tool, carefully pry up the rear housing and remove it.

5. Disconnect all flex cable connectors attached to the motherboard with the use of a plastic opening tool.

6. Unscrew all screws on the motherboard and gently lift the motherboard from the phone.

7. Replacement parts (repuestos) may now be installed. Ensure to connect all flex cables to the new parts.

8. Screw back the motherboard to its original place.

9. Re-attach the rear housing back to the front frame, ensuring to secure all screws.

10. Place the battery back into the phone, and close the back cover.

11. Switch on your device to confirm it works properly.

Remember, all work should be done with care to avoid damage to the phone or personal injuries.