Samsung Galaxy Beam I8530 spare parts

Samsung Galaxy Beam I8530 Technical Specifications

The Samsung Galaxy Beam I8530 was released in July 2012. This smartphone comes with a builtin projector, featuring a 15 lumen lamp that lasts up to 3 hours on a single charge.

• Display: 480 x 800 pixels, 4.0 inches, TFT capacitive touchscreen
• OS: Android 2.3.6 (Gingerbread), upgradable to 4.1.2 (Jelly Bean)
• CPU: Dual-core 1.0 GHz Cortex-A9
• Memory: 8GB 768MB RAM, microSDHC (dedicated slot)
• Camera: 5 MP, autofocus, LED flash
• Battery: Removable Li-Ion 2000 mAh battery

Instructions for Replacing Samsung Galaxy Beam I8530 Parts

Preparation

Before you start, ensure you have the necessary tools for the job: a small Phillips screwdriver, tweezers, plastic opening tool and a replacement part.

Removing the Back Cover and Battery

• Start by switching off the device.
• Remove the back cover of the Beam I8530 by gently prying it off with your fingers.
• Take out the battery by lifting it out carefully.

Unscrewing the Internal Cover

• With the Phillips screwdriver, remove the screws holding the internal cover in place.
• Use the plastic opening tool to gently pry up the internal cover.

Replacing the Desired Part

• Depends on the part you want to replace, locate it and gently take it out using the tweezers.
• Place the new part carefully in the same spot.

Reassembling the Phone

• Put the internal cover back and screw it in place.
• Insert the battery and put the back cover on.

Turn on your Samsung Galaxy Beam I8530 and make sure everything is functioning as expected. Reopen the device and check your connections if anything is out of order.