Samsung Galaxy E7 E700 spare parts
There are 2 products.Samsung Galaxy E7 E700 Repuestos: Technical Characteristics
The Samsung Galaxy E7 E700, a smartphone with a robust suite of features, requires high-quality repuestos (or spare parts) during repairs. Some of its key hardware and repuestos to understand for repairs include the following:
- Display: Super AMOLED 5.5 inches, 720 x 1280 pixels
- B...
Samsung Galaxy E7 E700 Repuestos: Technical Characteristics
The Samsung Galaxy E7 E700, a smartphone with a robust suite of features, requires high-quality repuestos (or spare parts) during repairs. Some of its key hardware and repuestos to understand for repairs include the following:
- Display: Super AMOLED 5.5 inches, 720 x 1280 pixels
- Battery: Non-removable Li-Ion 2950 mAh battery
- Camera: 13 MP, f/2.2, 28mm (wide), AF
- RAM and Internal Storage: 2 GB RAM and 16 GB ROM
- Processor: Qualcomm MSM8916 Snapdragon 410
- Operating System: Android 4.4.4 (KitKat), upgradable to 5.1.1 (Lollipop)
Instructions on How to Replace Samsung Galaxy E7 E700 Repuestos
Below is a stepwise guide to replacing the major repuestos of the Samsung Galaxy E7 E700. Note: Proceed with caution and at your own risk. It’s advisable to take assistance from a professional if you’re not comfortable performing these repairs on your own.
Screen Replacement
- Step 1: Begin by switching off your phone to prevent any potential electrical damage.
- Step 2: With a pry tool, gently peel off your screen protector (if any).
- Step 3: Remove any existing adhesive and clean the display area.
- Step 4: Apply fresh adhesive and carefully place the new screen on the phone.
Battery Replacement
- Step 1: Begin by switching off your phone.
- Step 2: Use a plastic tool to remove the back cover of your phone.
- Step 3: Locate the battery and gently pry it out using a safe prying tool.
- Step 4: Replace the old battery with a new one and reassemble your phone.
Camera Replacement
- Step 1: Switch off your phone.
- Step 2: Carefully remove the back cover using a prying tool.
- Step 3: Locate the camera module and remove the screws holding it in place.
- Step 4: Replace the old camera with a new one and refasten the screws.
- Step 5: Reassemble your phone.
Less More
Out of stock
Out of stock