Samsung Galaxy Fold F900F spare parts

Samsung Galaxy Fold F900F Specifications

The Samsung Galaxy Fold F900F is one of the top-of-the-line smartphones in the market. Here are its significant technical characteristics:

• Display: Main display 7.3" QXGA+ Dynamic AMOLED (2152*1536), Cover display: 4.6" HD+ Super AMOLED (1680*720)
• Camera: Rear - 16MP ultra-wide + 12MP wide + 12MP telephoto, Front - 10MP + 8MP RGB depth
• Processor: Qualcomm SM8150 Snapdragon 855 (7 nm)
• Memory: 12 GB RAM, 512 GB Internal Storage
• Battery: Non-removable Li-Po 4380 mAh battery
• Operating System: Android 9.0 (Pie), upgradable to Android 11, One UI 3.1.1

Replacement Guide for Samsung Galaxy Fold F900F

Replacing parts on the Samsung Galaxy Fold F900F requires meticulous care due to its intricate design and components. Please note that incorrect disassembly could damage your device.

Tools Needed:

• Plastic opening tools
• Small Phillips screwdriver
• Tweezers

Instructions to Replace Parts

It is highly recommended to follow the steps cautiously to replace the components correctly.

Power Off the Device

First, shut down your Samsung Galaxy Fold F900F. It is vital to ensure the device is powered off before any repair or disassembly to avoid any electrical damage.

Remove the Back Cover

Use a heat gun or a hair dryer to warm the adhesive that binds the back cover to the device. Then, using the plastic opening tool, carefully pry open the back cover along the edges.

Remove the Battery

Once the back cover is off, remove the screws holding the battery cover with a Phillips screwdriver. Lift the battery cover, unplug the battery connector, and carefully remove the battery with a plastic opening tool.

Replace Desired Part

Once you have the device open, locate the part you wish to replace. Carefully unscrew and detach any connectors holding the part in place. Install the replacement part, re-screw and reattach any connectors.

Reassemble the Device

Once the replacement is done, follow the disassembly steps in reverse to reassemble your device. Ensure all the connectors are properly placed, the screws are tightened, and the device is correctly closed, preventing any future damage.

Remember, perform all repairs at your own risk.