Samsung galaxy grand duos i9082 spare parts

    There are 34 products.

    Samsung Galaxy Grand Duos i9082 Specifications

    The Samsung Galaxy Grand Duos i9082 is an old power-packed device from Samsung. Here are the specifications:

    • Display: 5 inches TFT touchscreen, 480 x 800 pixels resolution
    • Processor: 1.2 GHz Dual Core
    • Storage: 8 GB Internal, expandable up to 64Gb via microSD card
    • RAM: 1 GB
    • Camera: 8 MP Rear camera ...

    Samsung Galaxy Grand Duos i9082 Specifications

    The Samsung Galaxy Grand Duos i9082 is an old power-packed device from Samsung. Here are the specifications:

    • Display: 5 inches TFT touchscreen, 480 x 800 pixels resolution
    • Processor: 1.2 GHz Dual Core
    • Storage: 8 GB Internal, expandable up to 64Gb via microSD card
    • RAM: 1 GB
    • Camera: 8 MP Rear camera and 2 MP Front camera
    • OS: Android 4.1 (Jelly Bean)
    • Battery: 2100mAh Li-Ion

    How to Replace Samsung Galaxy Grand Duos i9082 Components

    Preparation

    Before getting started, you'll need the following tools:

    • Small Phillips screwdriver
    • Spudger
    • Plastic Opening Tool
    • Pair of Tweezers

    Steps to open the device

    To open the phone and get access to its internal components, follow these steps:

    • Turn off your phone.
    • Remove the back cover and battery.
    • Remove the SIM card and SD Card if any.
    • Find the small Phillips screws around the edge of the phone and unscrew them.

    Replacing the display

    Once you have the phone open, to replace the display, follow these steps:

    • Use the plastic opening tool to gently pry the display away from the phone.
    • Slowly lift the display, being careful not to rip any ribbon cables.
    • Unclip the ribbon cables connected to the display from the main board using your spudger tool.
    • Connect the new display's ribbon cables to the mainboard.
    • Seat the new display in the phone and clip it in place.

    Replacing other components

    For replacing other components, you will have to locate the respective part and carefully unclip its ribbon cable, then remove and replace with the new part.

    Closing the device

    Once you have replaced your desired components, reverse the steps to reassemble your phone. Replace the screws, put the back cover, and battery. Don't forget to insert the SIM card and SD card if any. Turn on the device and test if everything works correctly.

    Please, note that this is a general guide. The process may vary depending on the specific component you are replacing.

    Less
    More
    Showing 31 - 34 of 34 items