Samsung galaxy grand neo i9060 spare parts

    There are 22 products.

    Samsung Galaxy Grand Neo i9060 Specifications

    The Samsung Galaxy Grand Neo i9060 is an Android-based smartphone that was launched by Samsung in 2014.

    • Display: 5.01 inches, 480 x 800 pixels
    • Processor: Quad-core 1.2 GHz Cortex-A7
    • Memory: 8/16 GB storage, 1 GB RAM
    • Camera: 5MP main, VGA selfie
    • Battery: Li-Ion 2100 mAh, rem...

    Samsung Galaxy Grand Neo i9060 Specifications

    The Samsung Galaxy Grand Neo i9060 is an Android-based smartphone that was launched by Samsung in 2014.

    • Display: 5.01 inches, 480 x 800 pixels
    • Processor: Quad-core 1.2 GHz Cortex-A7
    • Memory: 8/16 GB storage, 1 GB RAM
    • Camera: 5MP main, VGA selfie
    • Battery: Li-Ion 2100 mAh, removable

    Repairing Samsung Galaxy Grand Neo i9060

    Repairing a device should be done with caution. Please ensure that you have the right tools and parts before starting.

    Tools Needed:

    • Phillips Screwdriver
    • Spudger
    • Tweezers
    • Opening Tool

    How to Replace Samsung Galaxy Grand Neo i9060 Repuestos

    The following steps will guide you to replace Samsung Galaxy Grand Neo i9060 components.

    Step 1–Remove the Battery

    First, power off your device. Remove the back cover by gently lifting it from the small opening at the bottom of the phone. Once the cover is removed, take out the battery.

    Step 2–Remove the Screws

    Use a Phillips screwdriver to remove the 9 screws in the rear casing. Make sure to keep them in a safe place, as you will need them later for reassembly.

    Step 3–Remove the Rear Casing

    Start from the bottom and use an opening tool to gently pry the rear case away from the front panel. Do this all around the device until the casing is removed.

    Step 4–Disconnect the connectors

    With the phone's internals exposed, there will be various connectors linking different parts. Using a spudger, disconnect the connectors carefully.

    Step 5–Replacing the component

    Now that you have full access to the device's internals, you can replace the component that needs fixing. Be sure to place the new component correctly into the slot or spots where the old one was removed.

    Step 6–Reassembly

    Once the component is replaced, follow the steps in reverse order to reassemble your phone. Power on your device to ensure the replaced component is functioning correctly.

    Remember, attempting home repairs could potentially void your manufacturer's warranty. If you are not comfortable with these steps, consider seeking professional help.

    Less
    More
    Showing 1 - 22 of 22 items