Samsung Galaxy J6 2018 J600G spare parts

    There are 36 products.

    Technical Characteristics of Samsung Galaxy J6 2018 J600G Repuestos

    The Samsung Galaxy J6 2018 J600G, commonly referred to as Samsung Galaxy J6, is a device known for its impressive features and durability. It was launched in May 2018.

    • Display: Super AMOLED capacitive touchscreen, 16M colors, 5.6 inches,720 x 1480 pixels
    • Processor: Octa-core...

    Technical Characteristics of Samsung Galaxy J6 2018 J600G Repuestos

    The Samsung Galaxy J6 2018 J600G, commonly referred to as Samsung Galaxy J6, is a device known for its impressive features and durability. It was launched in May 2018.

    • Display: Super AMOLED capacitive touchscreen, 16M colors, 5.6 inches,720 x 1480 pixels
    • Processor: Octa-core 1.6 GHz Cortex-A53
    • Memory: Micro SD up to 256GB, 64 GB, 4 GB RAM or 32 GB, 3GB RAM
    • Battery: Non-removable Li-Ion 3000 mAh battery
    • Camera: 13 MP, f/1.9, 28mm, LED flash, panorama, HDR
    • OS: Android 8.0 (Oreo), upgradable to Android 9.0 (Pie)

    Instructions on How to Replace Samsung Galaxy J6 2018 J600G Repuestos

    The following instructions will guide you through the seamless process of replacing your Samsung Galaxy J6 2018 J600G repuestos.

    Step 1: Power off the phone

    Press and hold down the power button until the 'Power Off' prompt shows on the screen. Tap 'Power Off' to turn off your phone.

    Step 2: Remove the SIM Card Tray

    Insert the SIM card removal tool into the hole on the SIM card tray and push until the tray pops out, then pull out the tray from the frame.

    Step 3: Opening the back cover

    Use a suction cup and a plastic opening tool to remove the back cover. Start with the suction cup at the bottom of the phone, and gently pry up the rear glass.

    Step 4: Remove the motherboard

    Use a tweezers or spudger tool to remove the screws securing the motherboard. Once screws are removed, carefully lift the motherboard and unplug all flex cables connected to it.

    Step 5: Replace the faulty parts

    At this point, you can replace any faulty or damaged parts that you need to. This could include the battery, camera, speaker or even the entire motherboard. Just remember to be careful and handle all parts with care.

    Step 6: Reassemble the device

    Once you have replaced the faulty parts, you can start to reassemble your device. This step simply involves reversing the process outlined above.

    Note: If you are not comfortable with attempting this yourself, seeking a professional repair service is strongly recommended.

    Less
    More
    Showing 1 - 30 of 36 items