Samsung Galaxy J7 Prime 2 J7 Prime 2018

Samsung Galaxy J7 Prime 2 J7 Prime 2018 Technical Specifications

The Samsung Galaxy J7 Prime 2, also known as the J7 Prime 2018, boasts impressive features that ensure a seamless user experience for smartphone users. See the detailed features below:

• Display: 5.5-inch full HD PLS TFT display
• Processor: 1.6GHz Exynos 7 series Octa-core processor
• RAM: 3GB
• Internal Storage: 32GB (expandable up to 256GB)
• Camera: Rear 13 MP f/1.9, Front 13MP f/1.9
• Battery Life: 3,300 mAh non-removable battery
• Operating System: Android 7.0 Nougat, upgradeable to Android 9.0 Pie

Instructions for Replacing Samsung Galaxy J7 Prime 2 J7 Prime 2018

Tools Required

Before beginning the replacement process, ensure you have the following necessary tools at your disposal: a Phillips screwdriver, nylon spudger, tweezers, plastic opening tools, and a SIM card eject tool.

Steps to Replace Samsung Galaxy J7 Prime 2 J7 Prime 2018

• Step 1: Switch off the device and then remove the SIM card tray with the SIM card eject tool.
• Step 2: Use the plastic opening tools to gently pry open the back cover from the small opening at the bottom of the phone.
• Step 3: Remove any screws attaching the plastic plate to the phone using the Phillips screwdriver.
• Step 4: Use the nylon spudger to gently detach the battery connector from the motherboard.
• Step 5: Remove the screws securing the motherboard and remove it cautiously, disconnecting any cables attached.
• Step 6: At this point, you can replace the required component. It may be the front screen, battery, camera, etc.
• Step 7: Once the replacement is done, follow the above steps in reverse to reassemble your phone.

Note: Proceed with caution during each step to avoid damage to the phone or its components.