Samsung Galaxy Note 10 Plus SM-N975FD spare parts

Samsung Galaxy Note 10 Plus SM-N975FD Specifications

The Samsung Galaxy Note 10 Plus SM-N975FD smartphone is a high-end device with stellar specifications. Here are the key technical characteristics:

• Display: Dynamic AMOLED, 6.8 inches, 1440 x 3040 pixels
• Battery: Non-removable Li-Ion 4300 mAh battery
• Storage: 256GB 12GB RAM, 512GB 12GB RAM
• Camera: Quad rear camera (12 MP wide, 12 MP telephoto, 16 MP ultrawide, 0.3 MP depth sensor)
• OS: Android 9.0 (Pie), upgradable to Android 10, One UI 2.1
• Processor: Exynos 9825 (7 nm) - EMEA/LATAM or Qualcomm SM8150 Snapdragon 855 (7 nm) - USA/China

Instructions for Replacing Samsung Galaxy Note 10+ SM-N975FD Parts

Generally, replacing components on a Galaxy Note 10 Plus SM-N975FD requires some basic tools like a heat gun, spudger, tweezers, and a pry tool. This guide aims to walk you through the high-level steps, but remember to always take safety measures. Ensure the device is off before starting any repairing.

Step-by-step Repairing Process

• Heat the back cover: Use a heat gun or heating pad to soften the adhesive holding the back cover. Ensure to heat the edges more as adhesive is stronger around the edges.
• Remove the back cover: With the help of a pry tool or suction cup, lift up the back cover gently.
• Disconnect the battery: Use a spudger or tweezers to disconnect the battery connector from the motherboard.
• Remove the necessary screws: Depending on the part to be replaced, unscrew the appropriate screws. Be careful not to mix them up as they have different sizes.
• Replace the part: Carefully remove the old part and replace it with the new one.
• Reassemble the device: Once the part is replaced, screw back the removed screws. Reconnect the battery, and carefully reattach the back cover.

Remember, while working with delicate parts of the device, patience is essential. If you're not confident about performing the repair yourself, it's wise to get help from a professional repair service.