Samsung Galaxy Note 3 N9005 spare parts

Samsung Galaxy Note 3 N9005 Technical Specifications

The Samsung Galaxy Note 3 N9005 is a robust device with the following key hardware features:

• Screen: 5.7-inch full HD Super AMOLED display
• Processor: Qualcomm Snapdragon 800 chipset
• Memory: 3GB RAM
• Storage: Comes in 32/64 GB, expandable via microSD up to 64GB
• Camera: 13 MP rear camera and 2 MP front-facing camera
• Battery: 3200mAh

Instructions for Replacing Samsung Galaxy Note 3 N9005 Parts

When it comes to replacing the parts of your Samsung Galaxy Note 3 N9005, it's important to keep safety in mind and follow each step precisely. Also, make sure you have the right tools for the job: a plastic opening tool, a Phillips #00 Screwdriver, and a spudger.

Screen Replacement

Step 1: Start by turning off your Samsung Galaxy Note 3 N9005 to avoid damage during the repair process.

Step 2: Use the plastic opening tool to gently pry off the back cover towards the direction of the micro-USB port.

Step 3: Remove the battery.

Step 4: Unscrew all visible screws using your Phillips #00 Screwdriver.

Step 5: Use the plastic opening tool to separate the rear case from the rest of the phone. Be careful with the flex cable attached to the case.

Step 6: Unscrew the screws holding the motherboard in place. Carefully lift the motherboard, taking caution not to damage any attached cables.

Step 7: With the motherboard removed, you can now replace the screen. Gently remove the old screen and replace it with the new one.

Step 8: Now, reverse all the steps to put the device back in order.