Samsung Galaxy Note 8 spare parts

    There are 66 products.

    Samsung Galaxy Note 8 Repuestos Technical Characteristics

    The Samsung Galaxy Note 8 boasts some impressive specifications. Here are the main components you may need as replacements (repuestos):

    • Display: 6.3-inch Quad HD+ Super AMOLED, 2960 x 1440px resolution
    • Processor: Qualcomm Snapdragon 835 or Samsung Exynos 8895
    • RAM: 6GB
    • Storage: 64GB...

    Samsung Galaxy Note 8 Repuestos Technical Characteristics

    The Samsung Galaxy Note 8 boasts some impressive specifications. Here are the main components you may need as replacements (repuestos):

    • Display: 6.3-inch Quad HD+ Super AMOLED, 2960 x 1440px resolution
    • Processor: Qualcomm Snapdragon 835 or Samsung Exynos 8895
    • RAM: 6GB
    • Storage: 64GB, 128GB, or 256GB, expandable up to 512GB via microSD
    • Rear Camera: Dual 12MP sensors (wide-angle and telephoto), with Optical Image Stabilization
    • Front Camera: 8MP sensor, f/1.7 lens
    • Battery: 3300mAh

    Instructions for Replacing Samsung Galaxy Note 8 Repuestos

    Please follow these steps carefully. Remember that opening your device can void your warranty.

    Tools Needed

    • Phillips #00 Screwdriver
    • Spudger
    • Opening Picks
    • Heat gun or other device for heating phone surface

    Steps

    Here are the step-by-step instructions on how to replace the components (repuestos) of the Samsung Galaxy Note 8:

    1. First, turn off your device.
    2. Apply heat to the edges of the phone's back cover to soften the adhesive.
    3. Use the opening picks to gently pry off the back cover.
    4. Remove all twenty visible Phillips #00 screws attaching the rear components to the frame.
    5. Use the spudger to gently lift and remove the rear components.
    6. To replace the battery, disconnect the battery connector using the spudger. Then, carefully lift and remove the battery from the device.
    7. For other components, gently disconnect any connecting cables and lift the component out of the device. Some components (like the cameras) may be held in place with additional screws.
    8. Place your new components into the appropriate slots on the device. Reconnect any cables necessary for the new component to function.
    9. Once your new components are in place, reattach the back components and screw them back into the frame.
    10. Reapply adhesive to the edges and reattach the back cover.
    11. Turn on your device to see if the new components are working properly.

    That's it - you've successfully replaced the components of your Samsung Galaxy Note 8!

    Less
    More
    Showing 1 - 30 of 66 items