Samsung Galaxy Note II LTE N7105 spare parts

Samsung Galaxy Note II LTE N7105 Technical Specifications

The Samsung Galaxy Note II LTE N7105, also known as Samsung GT-N7105 or Samsung Galaxy Note2 4G, was launched in 2012. It falls under the smartphone category and runs on Android OS.

Key Specifications

• Operating System: Android 4.1.1 Jelly Bean, upgradable to Android 4.4.2 KitKat
• Display: Super AMOLED capacitive touchscreen, 16M colors; Size - 5.5 inches
• Resolution: 720 x 1280 pixels
• Processor: Quad-core 1.6 GHz Cortex-A9
• RAM: 2GB
• Storage: 16GB/32GB/64GB options, expandable via microSDXC (dedicated slot)
• Camera: Single 8 MP, AF; Selfie camera - 1.9 MP
• Battery: Removable Li-Ion 3100 mAh battery
• Connectivity: Wi-Fi 802.11 a/b/g/n, dual-band, DLNA, Wi-Fi Direct, hotspot; Bluetooth - 4.0, A2DP, EDR, LE

Instructions for Replacing Samsung Galaxy Note II LTE N7105 Components

The following guidelines will help you to replace the components of your Samsung Galaxy Note II LTE N7105 effectively.

Tools Needed For Replacement

• Small Phillips Screwdriver
• Plastic Opening Tools
• Tweezers
• Spudger

Instructions

Note: Before starting, ensure your device is powered off and disconnect it from any power source.

1. Remove the Back Cover

To remove the back cover, locate the slot located in the top left corner. Insert your fingernail or a plastic opening tool into the slot and gently lift the cover.

2. Remove the Battery

To disconnect the battery, lift it from the bottom edge using your fingers or the plastic opening tool. Remove the battery from the device.

3. Remove the Screws

There are 11 Phillips screws to remove from the rear housing. Use a small Phillips screwdriver to remove them carefully.

4. Separate the Frame from the Display Assembly

Use a plastic opening tool to disconnect the clips holding the frame and display assembly together around the edges of the device. Gently lift the frame away from the display assembly.

5. Replacing the Component

Once the frame is separated, you can replace the faulty component with the new one.

6. Reassembly

Follow the above steps in reverse order to reassemble your device.

Please handle all the components with care to avoid damage.