Samsung Galaxy S20 FE 5G spare parts

Samsung Galaxy S20 FE 5G Technical Characteristics

The Samsung Galaxy S20 FE 5G, short for Fan Edition, offers many of the flagship features of the Samsung S20 series at a more affordable price. Here are its technical characteristics:

• Display: 6.5-inch Full HD+ Super AMOLED, with a resolution of 2400 x 1080 pixels.
• Processor: Qualcomm Snapdragon 865.
• Memory: 6GB RAM, with 128GB or 256GB internal storage options.
• Camera: Triple-lens rear camera (12MP wide, 8MP telephoto, 12MP ultrawide) and a 32MP front-facing camera.
• Battery: 4500mAh.
• Operating System: Android 10, upgradable to Android 11, One UI 3.1.
• Connectivity: 5G compatible, Wi-Fi, Bluetooth 5.0, NFC, and USB Type-C.
• Dimensions: 159.8 x 74.5 x 8.4 mm.
• Weight: 190 grams.

Guide on How to Replace Samsung Galaxy S20 FE 5G repuestos

Note: Replacing parts on your Samsung Galaxy S20 FE 5G requires precision and careful handling. Please proceed with the following steps only if you are confident in your technical abilities. If not, it's recommended to seek help from a professional.

Tools Needed

• Heat gun
• Precision screwdriver set
• Spudger tool
• Opening tool
• Tweezers

Replacement Process

Here's a general guide to help you replace most components in your Samsung Galaxy S20 FE 5G:

1. Turn off your device first and remove the SIM card tray.
2. Use a heat gun to heat the edges of the back cover. This loosens the adhesive. Use suction handles and an opening tool to gently pry the back cover off. Be careful as the back is glass and can break easily.
3. Remove the screwed in bracket revealing the battery and motherboard connectors. Use a precision screwdriver to remove all visible screws.
4. Disconnect the battery connector using a plastic spudger tool. Now, the phone will not accidentally power on during the repuestos replacement.
5. Depending on the part you need to replace, you may need to remove more screws and disconnect more cables. Always use a plastic spudger for disconnecting cables to prevent damage.
6. Replace the faulty part with a new one.
7. Reassemble the device in the reverse order you disassembled it. Make sure all cables are connected and all screws are tight.
8. Turn on your device to verify the repair.

Note: Instructions can vary depending on the specific repuestos needing replacement. Always refer to a guide specific to your part for exact instructions.