Samsung Galaxy S21 Ultra spare parts

    There are 80 products.

    Technical Characteristics of Samsung Galaxy S21 Ultra Repuestos

    The Samsung Galaxy S21 Ultra is a cutting-edge smartphone packed with advanced features. Below are some of the main components or 'repuestos' of the Samsung Galaxy S21 Ultra:

    • Display: Dynmic AMOLED 2X, 120Hz, HDR10+, 1500 nits (peak)
    • Resolution: 1440 x 3200 pixels, 20:9 ratio
    • ...

    Technical Characteristics of Samsung Galaxy S21 Ultra Repuestos

    The Samsung Galaxy S21 Ultra is a cutting-edge smartphone packed with advanced features. Below are some of the main components or 'repuestos' of the Samsung Galaxy S21 Ultra:

    • Display: Dynmic AMOLED 2X, 120Hz, HDR10+, 1500 nits (peak)
    • Resolution: 1440 x 3200 pixels, 20:9 ratio
    • Processor: Exynos 2100 - Global
    • Storage: 128GB/256GB/512GB, not expandable
    • Camera: Quad 108 MP (wide); 10 MP (periscope telephoto); 10 MP (telephoto); 12 MP (ultrawide)

    Instructions on replacing the Samsung Galaxy S21 Ultra Repuestos

    Please proceed with caution and only if you're comfortable with taking apart electronic devices. Note that this can void the warranty.

    Tools Needed:

    • Screwdriver
    • Plastic opening tools
    • Spudger
    • Tweezers

    Steps to replace repuestos:

    1. Power off the Samsung Galaxy S21 Ultra to prevent any short-circuits.

    2. Using the plastic opening tool, gently pry the back cover from the base of the device. Do it gently to avoid any damage.

    3. Once the back cover is removed, use the screwdriver to remove screws attaching the metal cover to the motherboard. Always keep the screws in a safe place for reassembling later.

    4. Now, remove the metal shield. You can now access the motherboard and the connected components, be careful from this point since these components are fragile and sensitive.

    5. Identify the part you need to replace. Disconnect it gently from the motherboard. Replace it with the new part, ensuring it's connected securely.

    6. Replace the metal shield cover and secure it with the removed screws.

    7. Reattach the back cover, ensuring it snaps securely into place.

    8. Power on the device to ensure that everything is working properly.

    NOTE: These are generalized steps and might vary slightly based on the specific part you're trying to replace.

    Less
    More
    Showing 1 - 30 of 80 items