Samsung Galaxy S23 Plus repuestos

Samsung Galaxy S23 Plus Spare Parts - Technical Characteristics and Replacement Guide

This document contains detailed information about the technical characteristics of Samsung Galaxy S23 Plus spare parts along with comprehensive instructions on how to replace them. Please note that these instructions must be followed with utmost precision to ensure proper functionality post-replacement.

Technical Characteristics

• Display: AMOLED, 120Hz, HDR10+, 1600 nits (peak)
• Battery: Li-Po 5000 mAh, non-removable
• Rear Camera: 108 MP, f/1.8, (wide), 1/1.33", 0.8µm, PDAF, Laser AF, OIS
• Front Camera: 40 MP, f/2.2, 26mm (wide), 0.7µm, PDAF
• Processor: Exynos 2100 (5 nm) - International / Qualcomm SM8350 Snapdragon 888 5G (5 nm) - USA
• Memory: 12GB RAM, 128GB/256GB/512GB, UFS 3.1

How to Replace Samsung Galaxy S23 Plus Spare Parts

Note: Proceed with caution. Mistakes could lead to permanent device damage.

Display Replacement

• Power off the device and remove the SIM card tray.
• Heat the edges of the screen to soften the adhesive.
• Use a professional-grade suction cup to lift the screen.
• Insert a plastic card to separate the screen from the body.

Battery Replacement

• Unscrew and lift off the metal plate covering the battery connector.
• Disconnect the battery connector from the motherboard.
• Use pry tools to remove the battery.
• Insert a new battery and reconnect the battery connector.

Camera Replacement

• Unscrew the screws securing the camera module.
• Disconnect the camera connectors carefully from the board.
• Install the new camera and screw it back in its place.
• Reconnect the camera connectors to the board.

All materials referenced and other operations must be done by a professional repair technician.