Samsung Galaxy S3 I9305 spare parts

Samsung Galaxy S3 I9305 Specifications

The Samsung Galaxy S3 I9305, also referred to as S III, is a rugged and feature-rich smartphone produced by Samsung. Here are some of the main technical characteristics:

• OS: Android OS, v4.1.1 (Jelly Bean), upgradable to 4.3 (Jelly Bean).
• Chipset: Exynos 4412 Quad.
• CPU: Quad-core 1.4 GHz Cortex-A9.
• Screen: Super AMOLED capacitive touchscreen, 16M colors.
• Resolution: 720 x 1280 pixels, with ~306 ppi density.

Replacing Parts on a Samsung Galaxy S3 I9305

Replacing parts on your Samsung Galaxy S3 I9305 requires careful handling. Here is a general guideline on how you can go about this task:

Tools Required

• Small Phillips screwdriver
• Pry tool and pick
• Heat gun or hair dryer

Step-by-step Procedure

• Step 1: Battery Removal
  Before starting, make sure your device is powered off. Then, remove the back cover gently and take out the battery.

• Step 2: Remove Screws
  Using the screwdriver, carefully remove all the screws you can see after taking off the back cover.

• Step 3: Remove Back Frame
  Use the pry tool to remove the back frame. Start from the top corner and work your way around the edges.

• Step 4: Removing the Part
  Carefully identify the part you want to replace. Gently disconnect it from the motherboard. Note that some parts may be held down by adhesive or additional screws.

• Step 5: Installing the New Part
  Carefully position the new part and connect it to the motherboard. Make sure it is firmly in place before proceeding.

• Step 6: Reassemble the Device
  Once the new part is properly installed, reverse the steps taken to reassemble the device. Make sure to screw back all screws and ensure that everything is firmly in place before powering the device on.

Note: Be careful when handling the device and replacing parts. Any damage caused during the process is your responsibility. If you are unsure about anything, it is often best to seek help from a professional.