Samsung Galaxy S4 Active I9295 spare parts

Samsung Galaxy S4 Active I9295 Technical Specifications:

The Samsung Galaxy S4 Active I9295 is a rugged and powerful smartphone, designed to withstand outdoor use. It has the following specifications:

• Display: 5.0 in, Super AMOLED, 1080 x 1920 pixels, 24 bit
• Battery: 2600 mAh, Li-Ion
• OS: Android 4.2.2 Jelly Bean
• Camera: 4608 x 3456 pixels, 1920 x 1080 pixels, 30 fps
• System chip: Qualcomm Snapdragon 600 APQ8064T
• Memory: 2GB RAM and 16GB ROM, extended up to 64GB via microSD
• Connectivity: NFC, Bluetooth, microUSB, Wi-Fi, GPS, DLNA

Instructions to replace Samsung Galaxy S4 Active I9295 Repuestos:

Tools Required:

• Screwdriver
• Plastic opening tools
• Tweezers

Step-by-Step Disassembly:

Before starting, make sure that you have all the necessary tools and that the phone is turned off.

Note: Exercise caution throughout the disassembly process to avoid damaging the phone.

1. Remove the battery cover and battery from the rear side of the phone.
2. With the screwdriver, remove all visible screws from the rear casing.
3. Using a plastic opening tool, carefully pry open the rear case from the front assembly.
4. Locate the connector for the ribbon cable on the motherboard. Use tweezers to gently disconnect the ribbon cable.
5. Once the ribbon cable is disconnected, you can remove the damaged part.
6. Place the new part in the correct location and reconnect the ribbon cable to the motherboard.
7. Reassemble the phone by reversing the disassembly process.

Rest assured that with these detailed instructions, you should be able to successfully replace parts on your Samsung Galaxy S4 Active I9295.