Samsung Galaxy S5600 spare parts
There are 4 products.Samsung Galaxy S5600 Repuestos Technical Specifications
The Samsung Galaxy S5600, also known as Samsung S5600 Preston, is a feature phone from Samsung. It is equipped with various components that can be replaced when needed. These components include:
- Display: This device uses a 2.8 inch, 240x320 pixels, capacitive touchscreen.
- Battery: The Sams...
Samsung Galaxy S5600 Repuestos Technical Specifications
The Samsung Galaxy S5600, also known as Samsung S5600 Preston, is a feature phone from Samsung. It is equipped with various components that can be replaced when needed. These components include:
- Display: This device uses a 2.8 inch, 240x320 pixels, capacitive touchscreen.
- Battery: The Samsung Galaxy S5600 uses a Li-Ion 1000mAh removable battery.
- Camera: It features a 3.15 MP rear camera.
- Memory: The S5600 has an internal memory of 80MB and supports MicroSD cards up to 8GB.
Instructions for Replacing Samsung Galaxy S5600 Repuestos
Disassembling the Samsung Galaxy S5600
Before replacing any part, you must first disassemble the phone. Follow these steps:
- Turn off the phone and disconnect the charger and any other connected devices.
- Remove the back cover and the battery.
- Unscrew the screws using a screwdriver suitable for small electronics. Take care not to lose the screws as you will need them to reassemble the device.
- Use a plastic opening tool to gently pry off the front panel.
Replacing the Screen
You will first have to remove the old screen following these steps:
- Use the opening tool to remove the screen connector from the motherboard.
- Heat the screen lightly to soften the adhesive. It is highly suggested to use a heat gun on low settings to avoid any damage.
- Gently pry off the screen from the front panel.
- After the old screen has been removed, you can replace it with the new one. Firstly, stick double-sided tape on the edges of the front panel.
- Place the new screen on the panel, ensuring it lines up perfectly.
- Reconnect the screen connector to the motherboard.
Reassembling the Samsung Galaxy S5600
After replacing all necessary parts, follow these steps to reassemble your device:
- Start by positioning the front panel into place. Screw it back on.
- Insert the battery and cover the back.
- Turn on your device to see if everything functions correctly.
Note: Fusion of spare parts should only be done by a professional. If unsure, please see your nearest professional technician.
Less More
Disponible
Disponible
Disponible
Out of stock