Samsung Galaxy Xcover 5 SM-G525 spare parts

    There are 4 products.

    Samsung Galaxy Xcover 5 SM-G525 Repuestos Technical Specifications

    The Samsung Galaxy Xcover 5 SM-G525 is a rugged smartphone built to withstand the toughest environments. Here, we highlight its key technical specifications:

    • Display: 5.3 inches PLS IPS Display
    • Resolution: 720 x 1600 pixels
    • Processing Power: Exynos 850 (8nm) Chipset
    • Memory: 4GB ...

    Samsung Galaxy Xcover 5 SM-G525 Repuestos Technical Specifications

    The Samsung Galaxy Xcover 5 SM-G525 is a rugged smartphone built to withstand the toughest environments. Here, we highlight its key technical specifications:

    • Display: 5.3 inches PLS IPS Display
    • Resolution: 720 x 1600 pixels
    • Processing Power: Exynos 850 (8nm) Chipset
    • Memory: 4GB RAM
    • Storage: 64GB internal storage expandable up to 1TB via a microSD card slot
    • Camera: 16 MP, f/1.8, autofocus, LED flash
    • Battery: 3000mAh removable battery
    • OS: Android 11

    Replacement Guide for Samsung Galaxy Xcover 5 SM-G525 Repuestos

    Replacing parts in your Samsung Galaxy Xcover 5 SM-G525 requires a careful approach. Be advised that this guide is provided as a general reference and may not apply to all situations.

    Tools needed:

    • Heat gun or hair dryer
    • Plastic or metal spudger
    • Phillips #000 screwdriver
    • Guitar picks or plastic cards

    Instructions:

    Note: The process for replacing parts might slightly vary depending on the part to be replaced.

    1. Switch off the device: Before starting, power off your smartphone to avoid any electrical complications.
    2. Heat the edges: Use a heat gun to heat the edges of the screen to loosen the adhesive.
    3. Remove screen: With the use of a spudger or guitar pick gently pry up the phone’s screen.
    4. Remove screws: Use the Phillips #000 screwdriver to remove screws holding the device together.
    5. Open the device: Using the plastic spudger, pry open the device by inserting it into the gap between the screen and the frame.
    6. Replace the faulty part: Locate the faulty part, then gently remove it and replace it with the new one.
    7. Reassemble: Once replaced, follow this guide in reverse to reassemble your device.

    Warning: Always handle electronic components with care to avoid damage to the device.

    Less
    More
    Showing 1 - 4 of 4 items