Samsung Galaxy Xcover Pro SM-G715 repuestos

Samsung Galaxy Xcover 4 Pro SM-G715 Technical Characteristics

The Samsung Galaxy Xcover 4 Pro SM-G715 is a smartphone designed to be both rugged and functional. Here are its main technical characteristics:

• Model: Samsung Galaxy Xcover 4 Pro SM-G715
• Operating System: Android 10
• Processor: Exynos 9611
• Internal Storage: 64GB with expandable memory via MicroSD
• Display: 5.3 inch PLS TFT capacitive touchscreen, 16M colours
• Rear Camera: 25 MP, f/1.7, PDAF
• Front Camera: 13 MP, f/2.0
• Battery: 4050mAh, non-removable

Instructions for Replacing Samsung Galaxy Xcover 4 Pro SM-G715 Repuestos

Tools Required

Before starting, make sure you have the following tools:

• Screwdrivers (Phillips and flat head)
• Plastic prying tool
• New Samsung Galaxy Xcover 4 Pro SM-G715 repuestos

Step 1: Power Off the Device

Before you start, make sure to power off the device to avoid any short circuit during the replacement process.

Step 2: Remove the Back Cover

Use a plastic prying tool to gently lift the edges of the back cover. Once the edges are free, you can separate the back cover from the phone.

Step 3: Remove the Battery

After the back cover is removed, locate the battery. Lift the battery and carefully disconnect the connector to release it from the phone.

Step 4: Replace the Component

Locate the component that requires replacement (e.g. camera, circuit board). Carefully remove the screws securing the component and disconnect any attached cables. Replace it with the new component and reconnect any cables and replace the screws.

Step 5: Reassemble the Phone

Place the battery back and connect it. Press the back cover until it snaps securely into place.

Note

Please remember that it's always best to consult with a professional if you are unsure about replacing parts on your device. This guide is for informational purposes only, and any damage incurred during the repair process is not the responsibility of the writer.