Samsung SM-G780 Galaxy S20 FE 4G SM-G781 Galaxy S20 FE 5G

Technical Characteristics of Samsung SM-G780 Galaxy S20 FE 4G & SM-G781 Galaxy S20 FE 5G

All the details listed here are informative, based on manufacturer announcements and expecting that everything goes as planned without any issue. It's recommended to have actual hands-on experience or personal use to get aligned with the technical details and capabilities.

General Details

• Brand: Samsung
• Models: SM-G780F, SM-G781B
• Release Date: 2020, October 02

Body

• Dimensions: 159.8 x 74.5 x 8.4 mm (6.29 x 2.93 x 0.33 in)
• Build: Glass front (Gorilla Glass 3), plastic back, aluminum frame
• Weight: 190 g (6.70 oz)
• SIM: Single SIM (Nano-SIM and/or eSIM) or Hybrid Dual SIM (Nano-SIM, dual stand-by)

Display

• Type: Super AMOLED, 120Hz, HDR10+
• Size: 6.5 inches, 101.0 cm2 (~84.8% screen-to-body ratio)
• Resolution: 1080 x 2400 pixels, 20:9 ratio (~407 ppi density)
• Protection: Corning Gorilla Glass 3

Instructions to Replace Samsung SM-G780 Galaxy S20 FE 4G & SM-G781 Galaxy S20 FE 5G

Before starting, make sure to power off your Samsung Galaxy S20 FE and disconnect it from any attached cables. Only follow these steps if you're confident in your abilities and recognize that any potential damage done in attempting these instructions is your responsibility.

Remove Back Cover

Use a heat gun or heating pad to heat up the back cover's adhesive. Use a suction cup and thin plastic card to gently loosen the adhesive and lift the back cover.

Disconnect and Remove Battery

First, remove the wireless charging coil that's attached to the battery. After that, proceed to gently disconnect the battery from the logic board. Use a plastic spudger tool to disconnect the clip connecting the battery to the device. Then, Slide an opening pick between the battery and the phone chassis to pry the battery up and out of its housing.

Replace Screen Assembly

Disconnect the two display cable connectors from the motherboard. Remove the three screws securing the speaker to the mid frame. Peel off the screen from the mid frame. Once the front screen assembly has been removed, you can replace it with the new display.

Reassemble the Phone

Follow the disassembly steps in reverse order to reassemble the phone.