Spare Parts Samsung Galaxy A71 A715

Technical Characteristics of Repuestos Samsung Galaxy A71 A715

The Samsung Galaxy A71 A715 is a smartphone model with expansive features and parts. Here are the technical details:

• Screen: Super AMOLED Plus, 6.7 inches, 1080 x 2400 pixels, Corning Gorilla Glass 3
• CPU: Snapdragon 730 (8 nm) - Global
• RAM: 6GB/8GB
• Storage: 128GB
• Camera: Quad rear camera - 64 MP, 12 MP, 5 MP, 5 MP. Single front camera - 32 MP
• Battery: Non-removable Li-Po 4500 mAh battery
• Operating System: Android 10, upgradable to Android 11, One UI 3.0
• Dimensions: 163.6 x 76 x 7.7 mm

Instructions to Replace Repuestos Samsung Galaxy A71 A715

For the replacement of parts, it’s crucial to handle with utmost care. Follow the steps carefully:

Preparation:

• Ensure your workspace is clean and well-lit. Have your tools ready which include a Phillips screwdriver, tweezers, plastic opening tool, heat gun and a suction cup.
• Turn off your Samsung Galaxy A71 A715.

Step 1: Removing The Back Cover

• Use the heat gun to gently heat the edges of the phone’s back cover. This will loosen the adhesive.
• Attach the suction cup on the back of the phone. Start pulling it upwards to create a small gap between the frame and the back cover.
• Insert the plastic opening tool into the gap and slowly glide it around the phone, to further separate the back cover from the frame. Be cautious, not to damage the fingerprint sensor cable.
• Once completely separated, remove the back cover.

Step 2: Disconnecting Components

• With your Phillips screwdriver, remove all 14 screws affixing the mid-frame. Remove the frame.
• Unplug the battery connector using a plastic opening tool.

Step 3: Replacing Needed Components

• Identify the part to be replaced. Whether it's the screen, battery or any component, disconnect them and replace with new parts.

Step 4: Reassemble

• After making replacements, reconnect all connectors including the battery connector.
• Re-attach the mid-frame and screw in all the screws.
• Re-attach the back cover, ensuring the fingerprint sensor cable threads through the hole in the mid-frame and reconnects with the motherboard connector.
• Press the back cover into place to re-adhere.

Please remember that every replacement procedure carries risks and professional assistance is always recommended.