Sony Ericsson ARC S X12 LT15I LT18I spare parts

Technical Characteristics of Sony Ericsson ARC S X12 LT15I LT18I Repuestos

Display

Type: LED-backlit LCD, capacitive touchscreen, 16M colors

Size: 4.2 inches

Resolution: 480 x 854 pixels (~233 ppi pixel density)

Protection: Scratch-resistant glass

Platform

OS: Android 2.3.4 (Gingerbread), upgradable to 4.0 (Ice Cream Sandwich)

Chipset: Qualcomm MSM8255T Snapdragon S2

CPU: 1.4 GHz Scorpion

GPU: Adreno 205

Memory

Internal: 1 GB, 512 MB RAM

Card slot: microSD, up to 32 GB (dedicated slot), 8 GB included

Main Camera

Single: 8 MP, AF

Features: LED flash, geo-tagging, touch focus, face/smile detection, 3D sweep panorama

Video: 720p@30fps

Selfie Camera

Type: No

Battery

Type: Removable Li-Po 1500 mAh battery

Instructions for Replacing Sony Ericsson ARC S X12 LT15I LT18I Repuestos

Required Tools

• Plastic opening tools
• Small Phillips screwdriver
• Tweezers
• Adhesive strips

Steps to Replace Battery

• Step 1: Power off the device and remove the back cover by gently prying it open using a plastic opening tool.
• Step 2: Carefully remove the battery from the compartment.
• Step 3: Insert a new battery into the compartment, ensuring that the connectors align properly.
• Step 4: Reattach the back cover and press firmly to secure it in place.
• Step 5: Power on the device to verify that the new battery is functioning correctly.

Steps to Replace Display

• Step 1: Power off the device and remove the back cover.
• Step 2: Remove the battery, SIM card, and microSD card.
• Step 3: Use a small Phillips screwdriver to remove all visible screws securing the back panel.
• Step 4: Gently pry open the back panel using a plastic opening tool, starting from the corners.
• Step 5: Disconnect the ribbon cables connected to the motherboard using tweezers.
• Step 6: Carefully lift and remove the old display assembly.
• Step 7: Position the new display assembly in place, aligning the connectors.
• Step 8: Reconnect the ribbon cables and ensure they are securely attached.
• Step 9: Reattach the back panel and secure it with screws.
• Step 10: Insert the battery, SIM card, and microSD card back into their slots.
• Step 11: Reattach the back cover and power on the device to test the new display.

Steps to Replace Camera Module

• Step 1: Power off the device and remove the back cover.
• Step 2: Remove the battery, SIM card, and microSD card.
• Step 3: Use a small Phillips screwdriver to remove all screws securing the back panel.
• Step 4: Carefully pry open the back panel with a plastic opening tool.
• Step 5: Locate the camera module on the motherboard and disconnect its ribbon cable using tweezers.
• Step 6: Gently lift and remove the old camera module from its socket.
• Step 7: Position the new camera module into the socket and reconnect the ribbon cable.
• Step 8: Ensure the module is securely positioned before reassembling the device.
• Step 9: Reattach the back panel and secure it with screws.
• Step 10: Insert the battery, SIM card, and microSD card back into their slots.
• Step 11: Reattach the back cover and power on the device to test the new camera module.