Sony Ericsson C902 spare parts

Sony Ericsson C902 Technical Characteristics

The Sony Ericsson C902 is a classic mobile phone known for its sleek design and robust build quality. Here are the important technical characteristics for the C902 replacement parts (repuestos):

• Display: 2.0 inch TFT, 256K colors, 240 x 320 pixels
• Camera: 5 MP, autofocus, LED flash
• Memory: 160 MB internal, expandable via Memory Stick Micro (M2)
• Battery: Standard battery, Li-Ion 930 mAh (BST-38)
• Dimensions: 108 x 49 x 10.5 mm
• Weight: 107 grams
• Operating System: Proprietary

Instructions for Replacing Sony Ericsson C902 Repuestos

Tools Required:

• Phillips screwdriver
• Plastic opening tools
• Tweezers
• Replacement parts (e.g., battery, display, housing)

Steps to Replace the Battery:

• Power off the phone and remove the back cover.
• Remove the old battery by lifting it from the compartment.
• Insert the new battery into the compartment.
• Replace the back cover and power on the phone to check functionality.

Steps to Replace the Display:

• Power off the phone and remove the battery cover and battery.
• Unscrew all visible screws on the back panel using a Phillips screwdriver.
• Use a plastic opening tool to gently pry open the back panel.
• Disconnect the ribbon cable connecting the display to the motherboard.
• Remove the old display carefully, noting the position of any adhesive or clips.
• Place the new display in position and reconnect the ribbon cable.
• Reattach the back panel and screw it back into place.
• Insert the battery, replace the cover, and power on the phone to check if the new display works correctly.

Steps to Replace the Housing:

• Power off the phone and remove the battery cover and battery.
• Remove the SIM card and any memory cards.
• Unscrew all visible screws on the phone's back panel using a Phillips screwdriver.
• Gently use the plastic opening tool to pry open the phone housing.
• Disconnect any necessary components attached to the housing, such as the camera module or side buttons.
• Carefully remove the old housing and replace it with the new one.
• Reconnect all components to the new housing, including the camera module and side buttons.
• Reassemble the phone by screwing the back panel into place.
• Insert the battery, replace the cover, and power on the phone to ensure everything works correctly.

By following these detailed steps, you can successfully replace the repuestos of your Sony Ericsson C902. Remember to handle all components with care and make sure the phone is powered off before beginning any repair work.