Sony Ericsson Pro MK16I spare parts

Technical Characteristics of Sony Ericsson Pro MK16I Repuestos

The Sony Ericsson Pro MK16I, also known as Xperia Pro, is a smartphone known for its sliding QWERTY keyboard and durable build. When it comes to replacing its parts (repuestos), the following technical characteristics are important:

• Display: 3.7 inches, TFT capacitive touchscreen, 16M colors
• Resolution: 480 x 854 pixels (~265 ppi pixel density)
• Memory: 1 GB storage, 512 MB RAM, microSD up to 32 GB
• Camera: 8 MP, autofocus, LED flash
• OS: Android 2.3 (Gingerbread), upgradable to 4.0 (Ice Cream Sandwich)
• Chipset: Qualcomm MSM8255 Snapdragon S2
• CPU: 1 GHz Scorpion
• GPU: Adreno 205
• Battery: Removable Li-Po 1500 mAh battery

Instructions for Replacing Sony Ericsson Pro MK16I Repuestos

1. Battery Replacement

The battery is one of the most commonly replaced parts in any smartphone. To replace the battery of the Sony Ericsson Pro MK16I, follow these steps:

• Power off your device completely.
• Slide off the back cover from the top of the phone to reveal the battery compartment.
• Take out the old battery by lifting it from the bottom end.
• Insert the new battery by aligning the contacts and pressing it into place.
• Slide the back cover on until it clicks into place.
• Turn on your phone to ensure the new battery is working properly.

2. Screen Replacement

If your screen is cracked or not responding to touch, you may need to replace it. Here are the steps:

• Power off the device and remove the back cover and battery.
• Remove any screws that are holding the phone’s mid-frame in place.
• Using a plastic opening tool, carefully separate the mid-frame from the front assembly.
• Disconnect any ribbon cables connected to the display.
• Once separated, remove the defective screen from the front assembly.
• Place the new screen into the front assembly and reconnect all ribbon cables.
• Reattach the mid-frame and secure it with screws.
• Replace the battery and back cover, then power on the device to test the new screen.

3. Keyboard Replacement

To replace the QWERTY keyboard, follow these steps:

• Power off the device and remove the back cover and battery.
• Remove any screws to release the keyboard frame.
• Gently slide out the keyboard from the main body of the phone.
• Disconnect the keyboard flex cable carefully.
• Connect the new keyboard’s flex cable to the board.
• Slide the new keyboard into the main body of the phone.
• Secure the keyboard frame back using the screws.
• Reinsert the battery and back cover, then turn on the phone to check if the keyboard works properly.