Sony Ericsson Sola MT27I spare parts

Sony Ericsson Sola MT27I Technical Characteristics

The Sony Ericsson Sola MT27I, also known as Xperia Sola, is a versatile smartphone that was released in 2012. Below are its key technical characteristics:

Technical Specifications

• Display: 3.7 inches, 480 x 854 pixels (~265 ppi pixel density), Capacitive touchscreen
• Processor: Dual-core 1.0 GHz Cortex-A9
• GPU: Mali-400
• RAM: 512 MB
• Internal Storage: 8 GB (5 GB user available)
• OS: Android 2.3 (Gingerbread), upgradable to 4.0.4 (Ice Cream Sandwich)
• Camera: 5 MP, autofocus, LED flash; Video recording 720p@30fps
• Battery: Li-Ion 1320 mAh, removable
• Dimensions: 116 x 59 x 9.9 mm
• Weight: 107 grams

Instructions for Replacing Sony Ericsson Sola MT27I Repuestos

Follow the steps below to replace components (repuestos) in your Sony Ericsson Sola MT27I:

Tools and Materials Needed

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers
• Anti-static wrist strap (optional)
• Replacement parts (battery, screen, etc.)

Step-by-Step Instructions

Step 1: Power Off and Remove the Battery

1. Ensure the phone is powered off completely. If necessary, hold the power button until the device shuts down.

2. Remove the back cover of the phone carefully using a plastic opening tool.

3. Remove the battery by gently prying it out from the compartment.

Step 2: Remove the SIM Card and Memory Card

1. Remove the SIM card and any memory card from their respective slots.

Step 3: Unscrew the Back Frame

1. Use the small Phillips screwdriver to remove all visible screws securing the back frame of the phone.

2. Keep the screws in a safe place to ensure you do not lose them.

Step 4: Pry Open the Back Frame

1. With the screws removed, use a plastic opening tool to gently pry open the back frame from the main body of the phone.

2. Work your way around the edges until the back frame is completely detached.

Step 5: Disconnect Internal Components

1. Use tweezers to carefully disconnect the cables and connectors attached to the motherboard (e.g., display cable, battery connector).

2. Take note of each connector's position for reassembly.

Step 6: Remove and Replace the Faulty Component

1. Identify and gently remove the faulty component you wish to replace, such as the battery, screen, or camera module.

2. Place the new component in the same position and reconnect all cables and connectors securely.

Step 7: Reassemble the Phone

1. Reattach the back frame to the main body of the phone.

2. Secure the back frame by replacing and tightening all screws.

3. Insert the SIM card and memory card back into their slots.

4. Reinsert the battery and snap the back cover in place.

Step 8: Power On and Test

1. Power on the phone to ensure that the new component is functioning correctly.

2. Perform a thorough check to verify that all functionalities (e.g., display, touch, camera) are working as expected.

By following these steps, you should be able to successfully replace the necessary components in your Sony Ericsson Sola MT27I. Always handle small parts with care and work in a clean, static-free environment to avoid damage.