Sony Ericsson T610 spare parts

Technical Characteristics of Sony Ericsson T610 Repuestos

The Sony Ericsson T610 is a classic mobile phone known for its reliability and design. The following are the technical characteristics of the T610 repuestos (replacement parts):

• Screen: 1.8 inches, TFT display, 65K colors
• Resolution: 128 x 160 pixels
• Battery: Standard Lithium-Ion battery, 720 mAh
• Camera: VGA, 0.3 MP
• Connectivity: Bluetooth, Infrared port
• Body: 102 x 44 x 19 mm, 95 g

Instructions for Replacing Sony Ericsson T610 Repuestos

Replacing the Screen

Follow these steps to replace the screen of your Sony Ericsson T610:

• Step 1: Turn off the phone and remove the back cover and battery.
• Step 2: Unscrew the screws located around the back frame using a Phillips screwdriver.
• Step 3: Carefully pry open the front case using a plastic opening tool.
• Step 4: Disconnect the screen connector from the motherboard using a pair of tweezers.
• Step 5: Remove the damaged screen and replace it with the new screen.
• Step 6: Reconnect the screen connector to the motherboard.
• Step 7: Reassemble the phone by carefully snapping the front case back into place, screwing in the screws, and replacing the battery and back cover.
• Step 8: Turn on the phone to check if the new screen is functioning properly.

Replacing the Battery

Follow these steps to replace the battery of your Sony Ericsson T610:

• Step 1: Turn off the phone and remove the back cover.
• Step 2: Carefully remove the old battery.
• Step 3: Insert the new battery, ensuring it is correctly aligned with the contacts.
• Step 4: Replace the back cover.
• Step 5: Turn on the phone to verify that the new battery is working properly.

Replacing the Camera

Follow these steps to replace the camera of your Sony Ericsson T610:

• Step 1: Turn off the phone and remove the back cover and battery.
• Step 2: Unscrew the screws securing the back frame.
• Step 3: Carefully open the back frame to access the camera module.
• Step 4: Disconnect the camera connector from the motherboard using tweezers.
• Step 5: Remove the old camera and replace it with the new camera module.
• Step 6: Reconnect the camera connector to the motherboard.
• Step 7: Reassemble the phone by securing the back frame with screws, and replace the battery and back cover.
• Step 8: Turn on the phone to ensure the new camera is functioning properly.