Sony Ericsson U5 Vivaz spare parts

Technical Characteristics of Sony Ericsson U5 Vivaz Repuestos

The Sony Ericsson U5 Vivaz is a robust smartphone known for its sleek design and multimedia capabilities. Below are the technical characteristics of the replacement parts (repuestos) for this device:

Screen

• Type: TFT resistive touchscreen
• Size: 3.2 inches
• Resolution: 360 x 640 pixels

Battery

• Type: Li-Po 1200 mAh
• Stand-by time: Up to 430 hours (2G) / Up to 440 hours (3G)
• Talk time: Up to 13 hours (2G) / Up to 5 hours 20 min (3G)

Camera

• Primary: 8.1 MP, autofocus, LED flash
• Video recording: 720p@24fps

Other Replacement Parts

• Keypad & Buttons
• Housing cover
• Speaker & Microphone
• Flex cable

Instructions on How to Replace Sony Ericsson U5 Vivaz Repuestos

Tools Required

• Plastic prying tools
• Phillips screwdriver
• Pair of tweezers
• Sim card eject tool
• Adhesive (if necessary)

Step-by-Step Instructions

1. Power Off the Device

Ensure that the Sony Ericsson U5 Vivaz is completely powered off before beginning the replacement process.

2. Remove the Back Cover and Battery

Use the sim card eject tool to gently pry open the back cover. Once the cover is removed, take out the battery.

3. Remove the SIM Card and Memory Card

Take out the SIM card and memory card to prevent any potential damage during the repair process.

4. Unscrew the Screws from the Back Panel

Using the Phillips screwdriver, carefully unscrew all the screws securing the back panel. Keep the screws in a safe place.

5. Disconnect the Internal Components

Use the plastic prying tool to gently disconnect the various flex cables and connectors from the motherboard. This may include the display flex, camera flex, and any other connectors present.

6. Remove the Damaged Part

Carefully take out the damaged part you need to replace, be it the screen, camera, or other internal components, using the tweezers if necessary.

7. Install the New Replacement Part

Align the new replacement part in place of the removed damaged part. Secure it properly using the appropriate connectors and screws, if applicable.

8. Reconnect the Flex Cables and Internal Components

Carefully reconnect all the flex cables and connectors to the motherboard. Ensure each connection is secure to avoid any functionality issues.

9. Reassemble the Device

Reinstall the back panel by securing all the screws removed earlier. Install the SIM card and memory card back into their respective slots.

10. Power On the Device

Place the battery back into the device and affix the back cover. Power on the Sony Ericsson U5 Vivaz to test the functionality of the replaced component.

Congratulations! You have successfully replaced the repuesto on your Sony Ericsson U5 Vivaz.