Sony Ericsson U8 Vivaz Pro spare parts

Technical Characteristics of Sony Ericsson U8 Vivaz Pro Repuestos

The Sony Ericsson U8 Vivaz Pro is a sleek and powerful smartphone featuring a range of replaceable components. Here are the detailed technical characteristics of its repuestos (spare parts):

• Display Screen: 3.2-inch TFT resistive touchscreen, 16M colors, 360 x 640 pixels resolution
• Battery: Standard Li-Po 1200 mAh (BST-41)
• Camera: 5 MP, autofocus, LED flash, 720p video recording
• Processor: 720 MHz Cortex-A8
• Internal Memory: 75 MB, expandable via microSD, up to 32GB (standard 8GB included)
• Connectivity: Wi-Fi 802.11 b/g, Bluetooth 2.1, microUSB 2.0
• Other Components: QWERTY keyboard, accelerometer sensor, proximity sensor

Instructions on How to Replace Sony Ericsson U8 Vivaz Pro Repuestos

Replacing components on the Sony Ericsson U8 Vivaz Pro can be a delicate task. Follow these detailed instructions carefully to successfully replace the spare parts.

Tools Needed

• Small Phillips screwdriver
• Plastic pry tool
• Tweezers
• New replacement parts
• Small suction cup (optional for screen replacement)

Step-by-Step Instructions

1. Power Down the Device

Ensure that your phone is completely powered off before starting the replacement process.

2. Remove the Back Cover and Battery

• Use your fingernail or a plastic pry tool to lift the back cover off the phone.
• Carefully remove the battery by lifting it from its compartment.

3. Remove the SIM Card and microSD Card

• Take out the SIM card and any microSD card that may be in the phone.

4. Unscrew and Remove the Rear Housing

• Use the small Phillips screwdriver to remove all visible screws securing the rear housing.
• Gently pry around the edges of the phone with a plastic pry tool to separate the rear housing from the front assembly.

5. Disassemble the Internal Components

• Carefully disconnect any ribbon cables and connectors using tweezers.
• Lift out the motherboard and other internal components, such as the camera or speaker, that need replacement.

6. Replace the Defective Parts

• Install the new replacement parts by placing them in the correct positions and reconnecting ribbon cables and connectors.
• Ensure all components are securely in place before proceeding.

7. Reassemble the Phone

• Reattach the rear housing by aligning it with the front assembly and gently snapping it back into place.
• Secure the rear housing with the screws removed earlier.

8. Reinsert the SIM Card, microSD Card, and Battery

• Place the SIM card and microSD card back into their respective slots.
• Reinsert the battery into its compartment.

9. Replace the Back Cover

Snap the back cover onto the phone, ensuring it clicks into place securely.

10. Power On the Device

Turn the phone back on and verify that the replacement parts are functioning correctly.

By following these detailed instructions, you can successfully replace defective components of the Sony Ericsson U8 Vivaz Pro. Always handle with care to avoid damaging sensitive parts during the repair process.