Sony Xperia 10 III spare parts

    There are 39 products.

    Sony Xperia 10 III Repuestos: Technical Characteristics

    The Sony Xperia 10 III has an array of technical specs and repuestos you need to be aware of for replacements. Let's delve into the details:

    Screen

    • Size: 6.0 inches
    • Type: OLED capacitive touchscreen
    • Resolution: 1080 x 2520 pixels

    Battery

    • Type: Non-removable Li-Ion
    • Capacity: ...

    Sony Xperia 10 III Repuestos: Technical Characteristics

    The Sony Xperia 10 III has an array of technical specs and repuestos you need to be aware of for replacements. Let's delve into the details:

    Screen

    • Size: 6.0 inches
    • Type: OLED capacitive touchscreen
    • Resolution: 1080 x 2520 pixels

    Battery

    • Type: Non-removable Li-Ion
    • Capacity: 4500 mAh

    Camera

    • Main Camera: Triple setup - 12 MP, 8 MP, 8 MP
    • Selfie Camera: 8 MP

    Instructions for Sony Xperia 10 III Repuestos Replacement

    Before starting, ensure you have the required tools: a Phillips screwdriver, pry tool, and tweezers.

    Screen Replacement

    Follow these instructions:

    • Step 1: Power off the Xperia 10 III.
    • Step 2: Gently heat up the back cover's adhesive lining, then pry it off using the pry tool.
    • Step 3: Remove all screws inside and take out the metal cover.
    • Step 4: Disconnect the battery, and then the screen's connector ribbon.
    • Step 5: Install the new screen, reconnect the battery, replace the metal cover and screws, and finally re-stick the back cover.

    Battery Replacement

    Follow these instructions:

    • Step 1: After removing the back cover and metal plate as described above, disconnect the battery connector ribbon.
    • Step 2: Gently pry out the old battery and install the new one.
    • Step 3: Reconnect the battery connector, reassemble the metal plate, screws, and back cover.

    Camera Replacement

    Follow these instructions:

    • Step 1: With the back cover and metal plate removed, disconnect the camera module connector ribbon.
    • Step 2: Simply replace the old camera module with the new one.
    • Step 3: Reconnect the connector ribbon, then reassemble the metal plate, screws, and back cover.

    Note: For all replacements, make sure your device is powered off before you begin.

    Less
    More
    Showing 31 - 39 of 39 items