Sony Xperia C3 D2533 spare parts

Technical Characteristics of Sony Xperia C3 D2533 Repuestos

The Sony Xperia C3 D2533 is a mid-range smartphone known for its impressive selfie camera and balanced performance. Here are the technical characteristics of its components (repuestos) that might need replacement:

Display

• Size: 5.5 inches
• Resolution: 720 x 1280 pixels
• Type: IPS LCD capacitive touchscreen, 16M colors

Battery

• Type: Li-Ion 2500 mAh
• Stand-by: Up to 1040 h (2G) / Up to 960 h (3G)
• Talk time: Up to 11 h 30 min (2G) / Up to 25 h (3G)

Camera

• Primary: 8 MP, f/2.3, 25mm (wide), 1/4.0"", AF, LED flash, HDR
• Secondary: 5 MP, LED flash

Other Components

• Chipset: Qualcomm MSM8926 Snapdragon 400 (28 nm)
• CPU: Quad-core 1.2 GHz Cortex-A7
• GPU: Adreno 305
• Memory: 8 GB internal, 1 GB RAM, microSD up to 32 GB

Instructions for Replacing Sony Xperia C3 D2533 Repuestos

General Note

Before starting any repair, ensure the phone is powered off to avoid any electrical mishaps.

Tools Needed

• Small Phillips and flathead screwdriver
• Plastic pry tool
• Adhesive strips
• Spudger tool
• SIM card ejector tool
• Anti-static wrist strap (optional)

Step-by-Step Guide

1. Replacing the Display

• Remove the SIM card tray using the ejector tool.
• Use a small Phillips screwdriver to remove the screws from the back cover.
• Gently use a plastic pry tool to detach the back cover.
• Disconnect the battery connector to prevent short circuits.
• Carefully use the spudger tool to detach the old display from its adhesive without damaging the underlying components.
• Clean the area to ensure that no old adhesive remains.
• Attach the new display, ensuring it's properly aligned.
• Reapply adhesive strips if necessary to secure the new display.
• Reconnect the battery connector and reassemble the back cover by reversing the disassembly steps.

2. Replacing the Battery

• Follow the initial steps above to open the phone's back cover.
• Carefully disconnect the old battery connector using a spudger tool.
• Remove the old battery, which might be held by adhesive strips.
• Place the new battery in the same position, ensuring it's firmly in place with adhesive if needed.
• Reconnect the battery connector.
• Reassemble the phone following the disassembly steps in reverse order.

3. Replacing the Camera

• Open the phone as instructed previously.
• Locate the camera module and gently disconnect its connector.
• Remove the old camera module carefully.
• Install the new camera module by connecting its connector and securing its position.
• Ensure all internal components are in place and reassemble the phone.

By following these steps, you should be able to replace the main components of the Sony Xperia C3 D2533. Exercise caution and patience to ensure a successful repair.